Hi,
the ddcxinfo is not a hard requirement, it's optional to guide mode
setting for some
old drivers (or better more drivers some years ago before they gained
more fine
grained DDC and modesetting control).
The bug will be that the xcfgt2 script assumes the X.org driver is named
i810,
while the latest Intel driver are installed named "intel".
You can fix this in the package/xorg/xorg-server/xcfgt2.sh and then
rebuilding
the xorg-server to get the new file, and re-create the ISO:
./scripts/Create-ErrList -newremove
./scripts/Build-Target
./scripts/Create-ISO
let me know if it works, I'll also later review this and merge the
changes from
t2/trunk.
Yours,
gx-turbo wrote:
hi,
I added the ddcxinfo package with a config rule, as Mika wrote (thanks
Mika!!)
This seems to be a bug in the package selection of the generic/minimal
desktop target.
Now xcfgt2 script is running without errors.
But still the x server is not starting.
There is this respawning too fast message, and after five min a dark screen
for a minute, and then again the message.
I'm on 7.0 rc2
René Rebe wrote:
Hi,
are you using 7.0 or trunk to build? If you might have used a revision
some days
/ weeks ago where the xcfgt2 script was not yet adapted for the i810 to
intel
driver rename as it happened upstream at X.org.
I'll also check if the 7.0 tree requires the patch for the driver rename.
Yours,
Mika Pesu wrote:
Hi,
I belive you are missing a ddcxinfo package that provides dccprobe util.
br,
Mika
Hi all,
finally I created an installable CD, based on generic, minimal desktop.
main problem is now obviously the X server.
I can login on a console, but when I try to start with runlevel 5, the X
server does not start:
INIT: Id "X" respawning too fast : disabled for 5 min
messages are:
---------------------------------------------------------
XcfgT2 (C) Rene Rebe ...
Video card: Interl Corp 82845G/....
X driver: i810
/usr/X11R7/bin/xcfgt2: line 103: ddcprobe: command not found
No modes from DDC or FB detection, using defaults!
Using Modes ...
....
The system is now in RC5
----------------------------------------------------------
same messages are seen when I start topic 1 of X11 config in STONE (run
XcfgT2..)
can somebody help
--
René Rebe - ExactCODE GmbH - Europe, Germany, Berlin
Geschäftsführer: Susanne Klaus, René Rebe
Sitz: Berlin, Amtsgericht Charlottenburg HRB 105 123 B
USt-IdNr.: DE251602478
http://exactcode.de | http://t2-project.org | http://rene.rebe.name
-----------------------------------------------------------
If you wish to unsubscribe from this mailing, send mail to
[EMAIL PROTECTED] with a subject of: unsubscribe t2
