I get the same error after adding the rules reported below.
ToM wrote:
Hello René,
I don't know what's going on with the list!
I got only your post from today.
?
Anyway: just enable the expert option section, enable custom
package selection and add the rules:
O dietlibc
O embutils
It brings nothing new?
What do you mean?
Greetings,
ToM
Zitat von René Rebe <[email protected]>:
It arrived on the list multiple times and I already answered it
(why do you think it did not arrive?), to re-paste my answer:
ah sorry, I have not yet fixed dietlibc (and thus embutils) for
ARM EABI. Just deselect dietlibc and embutils. You'll usually
not need them on the BeagleBoard.
(in theory I could even upload the 2GB 1500 package T2 build
that lives on my Beagle rev-B, ... if I just had a minute to
polish it some more, ...)
Anyway: just enable the expert option section, enable custom
package selection and add the rules:
O dietlibc
O embutils
Alternatively you could fix dietlibc for ARM EABI.
Yours,
[email protected] wrote:
Hallo René,
ich versuche seit Do. letzter Woche diese Nachricht zu posten.
Leider kommt diese nicht an!
Mache ich etwas falsch?
Viele Grüße,
ToM
-------- Original-Nachricht --------
Datum: Fri, 17 Apr 2009 11:54:14 +0200
Von: [email protected]
An: [email protected]
Betreff: Re: Built ARM cortex-a8 (beagleboard) faild
Hello René,
first I had the idea to run the t2-arm in a QEMU.
Last week I got my beagleboard REV C2 ;-)
So fist I have to learn to handle it.
I play around with the angstrom-distribution *sorry* ;-)
Now I want to built a T2 for beagle and run into an error:
- Target Distribution
(generic) Generic System
(minimal) Minimalistic package selection
(none) Just create binary packages and isofs.txt
- Architecture, CPU and Optimization
(arm) ARM (Advanced RISC Machines)
(el) Build for little endian machines
(cortex-a8) cortex-a8 CPU
(gnueabi) GNU EABI
[ ] Generate code using the 16bit thumb instruction set
[*] This is a cross-build between architectures
== 14:30:00 =[1]=> Building base/dietlibc [0.31 8.0-trunk].
-> Preparing configuration to build this package with dietlibc
(statically).
-> Reading package config: package/base/dietlibc/dietlibc.conf
-> Preparing build in src.dietlibc.arm.20090416.142959.17519.t2-8-vm
-> Building. Writing output to $root/var/adm/logs/1-dietlibc.out
!> `bin-x86_64/diet-i' ->
`/root/t2-trunk/build/arm-8.0-trunk-generic-arm-gnue
abi-cortex-a8-cross/TOOLCHAIN/tools.cross/diet-bin/diet'
!> `bin-x86_64/diet-dyn-i' ->
`/root/t2-trunk/build/arm-8.0-trunk-generic-arm-
gnueabi-cortex-a8-cross/TOOLCHAIN/tools.cross/diet-bin/diet-dyn'
!> Running make CC=arm-t2-linux-gnueabi-gcc
CPP=arm-t2-linux-gnueabi-cpp CXX=a
rm-t2-linux-gnueabi-g++ prefix=/usr/dietlibc
docdir=/usr/dietlibc/doc/dietli ..
!> You should not call uname during the build!
!> arm-t2-linux-gnueabi-cc -I. -isystem include -pipe -nostdinc
-Os -fomit-fra
me-pointer -fstrict-aliasing -mhard-float -Wall -W
-Wchar-subscripts -Wmissi ..
!> cc1: sorry, unimplemented: -mfloat-abi=hard and VFP
!> Due to previous errors, no 1-dietlibc.log file!
!> (Try enabling xtrace in the config to track an error inside
the build system.)
-> $root/var/adm/logs/1-dietlibc.out -> 1-dietlibc.err
== 04/16/09 14:30:14 =[1]=> Aborted building package dietlibc.
After #./scripts/Cleanup I get some warnings!
Searching for lingering temp/backup files (this may take some time) ...
WARNING: Found package/./vdr/vdr-pin/pin-vdr.diff.old
WARNING: Found package/./contrib/rtai/.rtai_config
WARNING: Found package/./contrib/rtai/.rtai_config_comedi
Pleas can you guide me how to do this?
You'll also have to add the -omap linux kernel fork for the board
support (as I had no time, yet, to do so).
Greetings,
ToM
--
René Rebe - ExactCODE GmbH - Europe, Germany, Berlin
http://exactcode.de | http://t2-project.org | http://rene.rebe.name
-----------------------------------------------------------
If you wish to unsubscribe from this mailing, send mail to
[email protected] with a subject of: unsubscribe t2
