Super. Your one character changes to each of two files did the trick. It is now compiling Build-Target and is well past the mine (field) after recompiling base/util-linux and /base/dialog
Still building on the old laptop so it will be awhile before I know if it goes to the end. I am working with svn update of t2-trunk as of a few minutes ago. Thanks again for your patch. Bob G On Tue, 2009-10-27 at 16:04 +0200, Mika Pesu wrote: > Hi > > I attached util-linux and dialog patches. Dont really remember why i > have also changed util-linux build priority, but the attached dialog > patch priority should fix the mine package build. > > -Mika > > > Bob Gustafson kirjoitti: > > Hi Mika > > > > If you can just post your changes to the list, I'm sure that they will > > find their way into the t2-trunk. > > > > The dialog package is listed as a dependency to mine, but it isn't being > > built. Your comments seem right on. > > > > Bob G > > > > On Mon, 2009-10-26 at 19:45 +0200, Mika Pesu wrote: > > > >> Hi, > >> > >> I noticed this my self too, the key is to include dialog package as well > >> and modify it's build stages and priority. Dont remember offhand but i > >> think dialog package was missing stage 1 build and it's build priority > >> was after mine package. I think this was the cause of mine build fail, > >> that it is, if you get the same error on stage 1 mine build. > >> > >> I can't commit the changes my self to svn at the moment, but if someone > >> with svn write access could do it and verify dialog build options that > >> those are right. > >> > >> -Mika > >> > >> > >> Bob Gustafson kirjoitti: > >> > >>> I am just following the Documentation and am trying to build the T2 > >>> system itself. My build system was a small old laptop which seemed to > >>> trundle on ok, except when the Build-Target couldn't find dialog.h > >>> > >>> I now have a new system which has the Intel virtual bit and lots of > >>> horsepower. Just brought it up a couple of hours ago running > >>> Fedora-12-Beta. F12 seems to install and run pretty well, even with > >>> hardware RAID, which was a problem with Fedora-11 > >>> > >>> My intention is to bring up T2 as a virtual client with Fedora-12 as the > >>> base. Lots of moving parts at the moment though. > >>> > >>> I would appreciate if you would take a look at the Build-Target of the > >>> current t2-trunk as it is in svn. My build broke in mine where it could > >>> not find the dialog package. I sent several emails to the list detailing > >>> my progress and problem. > >>> > >>> Thanks for your clues. I will take them into account when I get my > >>> virtual T2 client installed. > >>> > >>> Bob G > >>> > >>> > >>> On Sun, 2009-10-25 at 10:22 +0100, Rene Rebe wrote: > >>> > >>> > >>>> Hi, > >>>> > >>>> On 22.10.2009, at 20:41, Bob Gustafson wrote: > >>>> > >>>> > >>>> > >>>>> Reading some of the handbook, it seems that Build-Pkg does not check > >>>>> dependencies, but that Build-Target does (??) Perhaps this is the > >>>>> problem. > >>>>> > >>>>> > >>>>> > >>>> Neither does. Emerge-Pkg does, but it is only meant for in-system > >>>> package installation and updates. > >>>> > >>>> > >>>> > >>>>> mine fails looking for dialog.h > >>>>> > >>>>> There are lots of dialog.h files sprinkled around in the t2-trunk > >>>>> directory, and there is a [DEP] dialog in the mine.cache file. > >>>>> > >>>>> ./scripts/Build-Pkg mine works fine: > >>>>> > >>>>> == 13:28:04 =[9]=> Building archiver/mine [0.23 8.0-trunk]. > >>>>> -> Reading package config: package/archiver/mine/mine.conf > >>>>> -> Preparing build in src.mine.default.20091022.132759.329.susie > >>>>> -> Building. Writing output to $root/var/adm/logs/9-mine.out > >>>>> -> $root/var/adm/logs/9-mine.out -> 9-mine.log > >>>>> == 10/22/09 13:30:02 =[9]=> Finished building package mine > >>>>> > >>>>> > >>>>> > >>>> Build-Pkg without any other option installs into your running system > >>>> (like Emerge-Pkg). > >>>> > >>>> > >>>> > >>>>> The local var/adm/logs directory shows an err file which happened > >>>>> about > >>>>> ten minutes ago during the Build-Target run and a much older > >>>>> 0-mine.log file > >>>>> > >>>>> Note that the 9-mine.log file from the above Build-Pkg run appears > >>>>> in > >>>>> the system root directory /var/adm/logs > >>>>> > >>>>> > >>>>> > >>>> That's the default of Build-Pkg. You would need to specify some more > >>>> options like -chroot and -root etc to exactly mimic what happens > >>>> during the target build. > >>>> > >>>> > >>>> > >>>>> These things are a puzzle to me. Why are these files scattered > >>>>> around > >>>>> and more importantly, why is mine failing to build under > >>>>> Build-Target? > >>>>> > >>>>> > >>>>> > >>>> Because then it builds in the cross compile / sandbox, most probably > >>>> some dependency or so is missing. I also recently changed mine to > >>>> cross compile with the gasgui fronted, because I needed that. Maybe a > >>>> typo slipped in. > >>>> > >>>> > >>>> What kind of target and configuration do you build? > >>>> > >>>> -- > >>>> René Rebe, ExactCODE GmbH, Jaegerstr. 67, DE-10117 Berlin > >>>> http://exactcode.com | http://t2-project.org | http://rene.rebe.name > >>>> > >>>> > >>>> > >>>> > >>> > >>> ----------------------------------------------------------- > >>> If you wish to unsubscribe from this mailing, send mail to > >>> [email protected] with a subject of: unsubscribe t2 > >>> > >>> > >>> > >>> > > > > > > > > plain text document attachment (dialog.patch) > Index: package/base/dialog/dialog.desc > =================================================================== > --- package/base/dialog/dialog.desc (revision 34726) > +++ package/base/dialog/dialog.desc (working copy) > @@ -36,6 +36,6 @@ > [L] GPL > [S] Stable > [V] 1.0-20050911 > -[P] X -----5---9 113.900 > +[P] X -1---5---9 113.900 > > [D] 1535550711 dialog-1.0-20050911.tgz ftp://invisible-island.net/dialog/ > plain text document attachment (util-linux.patch) > Index: package/base/util-linux/util-linux.desc > =================================================================== > --- package/base/util-linux/util-linux.desc (revision 34726) > +++ package/base/util-linux/util-linux.desc (working copy) > @@ -29,6 +29,6 @@ > [L] GPL > [S] Stable > [V] 2.16.1 > -[P] X -1-3-----9 115.000 > +[P] X -1-3-----9 112.000 > > [D] 1920311447 util-linux-ng-2.16.1.tar.bz2 > ftp://ftp.kernel.org/pub/linux/utils/util-linux-ng/v2.16/ ----------------------------------------------------------- If you wish to unsubscribe from this mailing, send mail to [email protected] with a subject of: unsubscribe t2
