Yep, but I also got quite some real work to do, ... First thing first, the realtime option is notoriously under-maintained, and will not build in any case most of the time. This is because the RTAI patch get's out of sync pretty quickly and few do care.
That being said, you certainly don't need it in any case, RTAI is to control like industrial engines, oil rick pumps and such, with high real time guarantees. For just getting some sound out it will likely not help at all. The orbit error however, is due to cross compiling it, we need to further improve on that. You could just comment orbit2 out for stage 0 or something like that. René On Jun 8, 2010, at 10:05 AM, Thomas Maier wrote: > Do you get this Mail? > > Am Montag, den 07.06.2010, 00:16 +0200 schrieb ToM: >> Hi Rene, >> >> now I try to build a desktop system + realtime option, to run jack audio >> with low latency. >> I get this error: >> >> == 23:43:23 =[0]=> Building gnome2/orbit2 [2.14.18 8.0-trunk]. >> -> Reading package config: package/gnome2/orbit2/orbit2.conf >> -> Preparing build in src.orbit2.max.20100606.234321.5930.T2 >> -> Building. Writing output to $root/var/adm/logs/0-orbit2.out >> !> installed software in a non-standard prefix. >> !> Alternatively, you may set the environment variables ORBIT_IDL_CFLAGS >> !> and ORBIT_IDL_LIBS to avoid the need to call pkg-config. >> !> See the pkg-config man page for more details. >> !> Due to previous errors, no 0-orbit2.log file! >> !> (Try enabling xtrace in the config to track an error inside the build >> syst .. >> -> $root/var/adm/logs/0-orbit2.out -> 0-orbit2.err >> == 06/06/10 23:43:39 =[0]=> Aborted building package orbit2. >> -> Unmounting loop mounts ... >> > > > -- > Mit freundlichen Grüßen, > Thomas Maier Dipl. Ing. > > Hindenburgstr. 84 > D-73207 Plochingen > eMail: [email protected] > Mobil: +49 177 - 3960 000 > Fon: +49 7153 - 740 974 > Fax: +49 7153 - 740 976 > -- René Rebe, ExactCODE GmbH, Jaegerstr. 67, DE-10117 Berlin http://exactcode.com | http://t2-project.org | http://rene.rebe.de
----------------------------------------------------------- If you wish to unsubscribe from this mailing, send mail to [email protected] with a subject of: unsubscribe t2
