The t2 system is complicated. Running on Kubuntu, you are using Kubuntu utilities to build t2-8.0. Once you find how to comment out the problem below, there may well be yet another problem, and another.
You are then essentially debugging the interaction between the Kubuntu utilities and the t2-8.0 source code. This can be the hard way to do the job. If you go to http://www.t2-project.org/download and look at the first sentence: "You can use T2 either to build an entire system from source, or get pre-built installble or live binary images:" It is easier to download an installable image and install it on your Kubuntu hardware (this wipes out your Kubuntu system.. caution here) and then use the installed t2-8.0 to build a new t2-8.0 system from source code. It seems a little bit roundabout, but once you can build the t2-8.0 system this way, then you can build more up to date t2 systems with less fear that you will run into problems. An alternative way is to set up a virtual system within Kubuntu (I don't know if Kubuntu supports virtual systems? Fedora 13 does.. You also need hardware support in your CPU for running a virtual system) With a virtual system, you can load the installable t2-8.0 image into your virtual system and proceed to build t2-8.0 within that virtual shell. This avoids having to wipe your Kubuntu system entirely. Another alternative way is to use a live binary image as mentioned in http://www.t2-project.org/documentation/installintro.html I have not done this and can't advise you further than the documentation. Hope this helps Bob Gustafson On Mon, 2010-09-20 at 08:13 +0800, 任世军 wrote: > I use Kubuntu-10.04.1. please tell me how to comment the module that I > don't need. > > > -----原始邮件----- > > 发件人: "Bob Gustafson" <[email protected]> > > 发送时间: 2010-09-20 07:58:22 > > 收件人: "任世军" <[email protected]> > > 抄送: "T2 developers mailing list" <[email protected]> > > 主题: Re: [t2] compiling linux26 failed > > > > What is your host system that you are using to build the t2-8.0 system? > > > > On Mon, 2010-09-20 at 07:27 +0800, 任世军 wrote: > > > hi, > > > > > > when I come to linux26, always failed. first, utsrelease.h can not be > > > found. > > > > > > during compiling, I copy utsrelease.h from include\generated to include > > > and include\linux. > > > > > > now error exsits as in 5-linux26.err. > > > > > > the version is t2-8.0 stable. > > > > > > > > > Ren Shijun > > > Department of computer science > > > harbin institute of technology > > > harbin 150001 > > > china > > > > > > > > > > > > > > > > > > ----------------------------------------------------------- If you wish to unsubscribe from this mailing, send mail to [email protected] with a subject of: unsubscribe t2
