Dear Toan,
build stages 2-9 are for native builds. If you cross build to arm on let's say
x86 T2 will only use the cross compile stages 0 (toolchain) and 1 (cross
build), this is by design and all right.
Regards,
René Rebe
On 14.02.2011, at 23:14, Toan Pham wrote:
>
> Hi,
>
>
> I was trying to cross a build for ARM-cortex-A8 using the 'embedded'
> target on T2SDE-8.0 and
> the build finished at stage-1 and did not continue on to stage-3-9,
> for example. It tried to finalize the
> root-filesystem (squashing and preparing initrd etc.) after stage-1
> without any errors. This seemed
> a little bit odd, and so I added dropbear to the package list and
> re-ran the build, it did the same thing.
> I then tried to include dropbear by issuing
>
> scripts/Build-Target -cfg myconfig -job 5-dropbear
>
> the error i then recieved was: no job specs: 5-dropbear
>
>
> I can not add or force SDE-tool to include additional packages and/or
> continue on other build stages. Am i missing something?
>
>
>
> thank you,
>
> Toan
>
>
>
> -----------------------------------------------------------
> If you wish to unsubscribe from this mailing, send mail to
> [email protected] with a subject of: unsubscribe t2
--
René Rebe, ExactCODE GmbH, Jaegerstr. 67, DE-10117 Berlin
http://exactcode.com | http://t2-project.org | http://rene.rebe.de
-----------------------------------------------------------
If you wish to unsubscribe from this mailing, send mail to
[email protected] with a subject of: unsubscribe t2
