Hi,
I added libel to the 00-minimal list for wpa_supplicant:
Committed revision 43169.
René
On Aug 22, 2014, at 12:33, scsijon <[email protected]> wrote:
> try2, sorry
> ----------------
>
> I think i may have ?sorted out the wpa_supplicant problem.
>
> It has a patch that wants libnl-3.0 in the packages list directory, and
> as I read the error file, the build is failing because the package is
> not installed.
>
> 00-minimal doesn't have libnl set to be included to start with.
>
> libnl in the mirror and packages list is version 3.2.24.
>
> Does this mean that I should remove the patch or add libnl to 00-minimal?
>
> ----------
>
> For portmap, it seems to want ld -lwrap, but I can't find any -lwrap in
> any of the ld's I have access too, so i'm not sure where to go from here.
>
> -----------
>
> For aufs and aufs3, I need guidance please, can I use existing patches
> or what, or do I build without patches?
>
> thanks
>
> On 08/17/2014 02:37 PM, scsijon wrote:
>> so there are 4 problem packages left for a 00-minimal.
>>
>> Also as i said in my last email, I wonder if 1-man is required as it
>> builds ok at 5-man?
>>
>> However problems still exist with 5-aufs, 5-portmap and
>> 5-wpa_supplicant, I have attached their error files.
>>
>> As you said last time for aufs, I also wonder if it's time to move to
>> aufs3 as aufs2 has no support for 3.16 and later. It lost it for 3.x
>> kernels back in oct 2012 according to the coders website.
>>
>> Is it worth me manually building these failed packages and building a T2
>> v9 from that or is it best to await fixes?
>>
>> My next step would be the xorg build, from that it becomes puppy
>> integration.
>>
>> As I said when I first started worrying you, I really want to build the
>> puppy packages that I will use, and make available, from a working T2
>> V9.0 Trunk system, so I then know that any problems that appear are most
>> likely puppy related and not T2 related.
>>
>> I also noticed a number of packages are giving warnings about 'the use
>> of custmain is depreciated, please use hooks instead'. I remember that
>> linux-header was the first it appeared in during building but there were
>> quite a few others. Not sure if your interested.
>>
>> regards
>>
>> On 08/15/2014 06:35 PM, ExactCODE wrote:
>>> Hi,
>>>
>>> as per earlier email I personally fixed some of those shared file
>>> (coreutils, mktemp, …) some days ago.
>>>
>>> 1-man was trying to install files outside of the new system root.
>>>
>>> aufs may need an update
>>>
>>> On Aug 15, 2014, at 1:33, scsijon <[email protected]> wrote:
>>>
>>>> I should have waited a few more minutes.....
>>>>
>>>> The minimal build has completed building it's packages with these
>>>> final package errors, so it's not useable yet!
>>>>
>>>> aufs
>>>> coreutils
>>>> mktemp
>>>> portmap
>>>> procps
>>>> shadow
>>>> wpa_supplicant
>>>>
>>>> Interesting that man was ok under 5-man
>>>>
>>>> All error logs from packages of this build are attached. I haven't
>>>> added the overall build logs due to size. I will if you need it, but
>>>> i'd like to fix a few first and rerun the build. And yes I shall have
>>>> a look when free later today for obvious problems I can fix.
>>>>
>>>> regards
>>>> scsijon
>>>>
>>>> -------- Original Message --------
>>>> Subject: Re: [t2] T2 problems - part d) building
>>>> Date: Fri, 15 Aug 2014 08:49:09 +1000
>>>> From: scsijon <[email protected]>
>>>> To: [email protected]
>>>>
>>>> Update: I eventually got T2 V8 minimal loaded on one of my testing
>>>> computers by blowing everything away and starting it as a raw
>>>> (unpartitioned or formatted) system but even that wouldn't build
>>>> anything so I went another path by using another puppy called slacko and
>>>> are using it as a base to build from.
>>>>
>>>> I am currently building a minimal and when it's working I intend to use
>>>> that for further building, but I need to get there first.
>>>>
>>>> I have set the following config changes for now as it at least runs and
>>>> should give useable logs for fixing.
>>>>
>>>> Generic
>>>> minimal
>>>> pkgdist
>>>>
>>>> /root/t290minpkg
>>>> -
>>>> -
>>>>
>>>> -Build system configuration
>>>> Continue on package error after stage 0 (toolchain)
>>>> Retry building broken packages
>>>> Do not try building packages if deps failed
>>>> Keep src dirs on build errors
>>>> Create debug information (xtrace) for builds
>>>>
>>>>
>>>>
>>>> Problems to date:
>>>>
>>>> 1- Shouldn't the Kernel-Headers package use the same version of the
>>>> kernel as the actual Kernel Package? It is in puppy and in fact they are
>>>> both created, plus a kernel-?.src package also needed with the header
>>>> package for additional driver package building, at the same time.
>>>>
>>>> 2- Building Generic>Toolchain
>>>> The package Man fails to build until 5-man.log. I have attached the
>>>> errorfile 1-man.err for your perusal. This is from a generic, toolchain
>>>> only build.
>>>>
>>>> 3- Building Generic>minimal
>>>> I shall send you the results from the minimal build when it's
>>>> completed
>>>> however I already have error logs showing for 1-man, 1-mktemp, 1-procps,
>>>> 3-coreutils, 3-mktemp and 3-procps, so there are serious problems
>>>> here also.
>>>>
>>>> regards
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> <1-man.err><1-mktemp.err><1-procps.err><3-coreutils.err><3-mktemp.err><5-aufs.err><3-procps.err><5-coreutils.err><5-mktemp.err><5-portmap.err><5-shadow.err><5-wpa_supplicant.err>-----------------------------------------------------------
>>>>
>>>> If you wish to unsubscribe from this mailing, send mail to
>>>> [email protected] with a subject of: unsubscribe t2
>>>
>
>
>
--
ExactCODE GmbH, Jaegerstr. 67, DE-10117 Berlin
http://exactcode.com | http://exactscan.com | http://ocrkit.com |
http://t2-project.org | http://rene.rebe.de
-----------------------------------------------------------
If you wish to unsubscribe from this mailing, send mail to
[email protected] with a subject of: unsubscribe t2
