Hi Jan,
looks reasonable - manual copy’n pasted:
Committed revision 45223.
Seasonal greetings,
René
On Dec 27, 2016, at 18:11, Jan Rovins <[email protected]> wrote:
>
> One of the Pi failures was in u-boot, the T2 configuration was asking for the
> 'versatile' defconfig, but that does not exist in the u-boot source tree.
> But they do have some defconfigs to cover various models of the raspberry pi
> (rpi rpi_2 rpi_3)
>
> I got u-boot to build by changing the SDECFG_ARM_BOARDDEF to be 'rpi', and
> also adding that option to the architecture/arm/config.in file.
>
> I am not sure if this is the proper fix, since I don't know what else
> SDECFG_ARM_BOARDDEF is used for. if it's only used for u-boot, then this will
> work, if other packages use SDECFG_ARM_BOARDDE, then the 'rpi' setting may
> not work.
>
> I would like a build that would run on all versions of the Pi, so I am using
> 'rpi'instead of 'rpi_3', but I am not sure if this will work yet.
>
>
> ===================================================================
> --- target/rasperrypi/config.in (revision 45213)
> +++ target/rasperrypi/config.in (working copy)
> @@ -23,7 +23,9 @@
> SDECFGSET_ARM_ENDIANESS='el'
> SDECFGSET_ARM_OPT='arm1176jzf-s'
> SDECFGSET_ARM_ABI='gnueabi'
> -SDECFG_ARM_BOARDDEF='versatile'
> +#SDECFG_ARM_BOARDDEF='versatile'
> +#SDECFG_ARM_BOARDDEF='rpi_3'
> +SDECFG_ARM_BOARDDEF='rpi'
> SDECFG_ARM_THUMB='0'
> SDECFG_SOFTFLOAT='0'
>
> ===================================================================
> --- architecture/arm/config.in (revision 45213)
> +++ architecture/arm/config.in (working copy)
> @@ -194,6 +194,7 @@
> realview "realview Board" \
> realview-smp "realview-smp Board" \
> rpc "rpc Board" \
> + rpi "Raspberry Pi Board" \
> s3c2410 "s3c2410 Board" \
> sam9_l9260 "sam9_l9260 Board" \
> shannon "shannon Board" \
> Index: package/base/glibc/glibc.conf
> ===================================================================
>
> Jan
>
>
>
> ----------------------------------------------------------- If you wish to
> unsubscribe from this mailing, send mail to
> [email protected] with a subject of: unsubscribe t2
--
ExactCODE GmbH, Lietzenburger Str. 42, DE-10789 Berlin
DE Legal: Amtsgericht Berlin (Charlottenburg) HRB 105123B, Tax-ID#: DE251602478
Managing Director: René Rebe
http://exactcode.com | http://exactscan.com | http://ocrkit.com |
http://t2-project.org | http://rene.rebe.de
-----------------------------------------------------------
If you wish to unsubscribe from this mailing, send mail to
[email protected] with a subject of: unsubscribe t2
