On Thu, May 28, 2015 at 03:29:53PM -0500, Brad Neuhauser wrote: > On Thu, May 28, 2015 at 2:57 PM, Richard <[email protected]> wrote: > > > On Thu, May 28, 2015 at 01:09:56PM -0500, Brad Neuhauser wrote: > > > If this is like many fuel stations, it's probably just a roof with no > > > walls. Typically, I've seen those tagged building=roof. In that case, the > > > covered=* tag seems redundant. > > > > true, but I consider building=roof somewhat poor as the roof isn't > > usually floating in the air but there are pylons, sometimws one or > > more walls and often a building attached. > > > > > > does it make a difference whether the roof is attached to walls (or a > building), or whether it's on pylons? the wiki for building=roof says it > can be used when a structure is open on at least 2 sides, which would seem > to include a structure with no walls.
building=roof with walls + layer=1 does not look clean and could cause routing problems. Richard _______________________________________________ Tagging mailing list [email protected] https://lists.openstreetmap.org/listinfo/tagging
