The voltage. Get out your volt meter and verify what the voltage is!
</joking>

I don't know enough about the transformers but it looks like the ESB use
33KVA and 15KVA transformers to step down from 20KV or 10KV to 230V.
Reference is
https://www.esbnetworks.ie/docs/default-source/publications/assessment-of-the-scope-for-higher-penetrations-of-distributed-generation-on-the-low-volage-distribution-network.pdf

From what I've seen the inbound / outbound voltages aren't specified but
you may be able to deduce them. :)
I have some photos if you need them.

Donal


On Sun, Nov 1, 2020 at 5:01 PM Tadeusz Cantwell <t4d...@gmail.com> wrote:

> I'm getting an error for voltage=low for a transformer. Had a look at the
> wiki but not sure what should to use instead.
> https://wiki.openstreetmap.org/wiki/Key:voltage:secondary
> Any ideas?
> _______________________________________________
> Talk-ie mailing list
> Talk-ie@openstreetmap.org
> https://lists.openstreetmap.org/listinfo/talk-ie
>


-- 
Donal Hunt
OpenStreetMap Ireland
donal.h...@openstreetmap.ie | +353 87 8175123
_______________________________________________
Talk-ie mailing list
Talk-ie@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-ie

Reply via email to