Thanks KevinI will give that a try.Abby
Sent from my Samsung device
-------- Original message --------
From: Kevin Cozens <[email protected]>
Date: 08-07-2015 16:39 (GMT-05:00)
To: [email protected]
Subject: Re: [GTALUG] UEFI bios/firmware
On 15-08-07 03:41 PM, Steve Harvey wrote:
> 1) getting the attention of the firmware that runs on initial startup
> before the operating system (Windows or Linux) gets to start, and
>
> 2) navigating the setup menus to disable the UEFI.
Once you find the UEFI settings in the BIOS you may find that access to it
is disabled. You will most likely need to set a supervisor password for the
BIOS before it will let you have access to the UEFI settings. Just remember
to remove the supervisor password when you are done (if you don't want/need it).
--
Cheers!
Kevin.
http://www.ve3syb.ca/ |"Nerds make the shiny things that distract
Owner of Elecraft K2 #2172 | the mouth-breathers, and that's why we're
| powerful!"
#include <disclaimer/favourite> | --Chris Hardwick
---
Talk Mailing List
[email protected]
http://gtalug.org/mailman/listinfo/talk
---
Talk Mailing List
[email protected]
http://gtalug.org/mailman/listinfo/talk
