Hallo Liste,
vielen Dank f�r Deine konkreten Hinweise, Jochen Heim. Nat�rlich habe
ich gleich losgelegt. Vergebt mir bitte die lange Liste mit
Fehlermeldungen. Das liegt daran da� ich nicht wei� was davon f�r dieses
Problem wichtig ist. Bitte entschuldigt die L�nge der Texte !
Ich will Niemanden damit zuschei�en. Aber irgendwo da drin mu� das
Unerfreuliche sein
- und vermutlich habe ich auch nur einen saudummen Anf�ngerdetailfehler
gemacht.
[root@koekdv michael]# isdnctrl list ippp0
Current setup of interface 'ippp0':
EAZ/MSN: 067346713
Phone number(s):
Outgoing: 019231750 1019 0
Incoming:
Dial mode: auto
Secure: on
Callback: off
Reject before Callback: off
Callback-delay: 5
Dialmax: 3
Hangup-Timeout: 180
Incoming-Hangup: on
ChargeHangup: off
Charge-Units: 0
Charge-Interval: 0
Layer-2-Protocol: hdlc
Layer-3-Protocol: trans
Encapsulation: syncppp
Slave Interface: None
Slave delay: 10
Slave trigger: 6000 cps
Master Interface: None
Pre-Bound to: Nothing
PPP-Bound to: 0
Was k�nnt Ihr aus dieser Konfiguration ableiten ?
[root@koekdv michael]# ifconfig
eth0 Protokoll:Ethernet Hardware Adresse 00:40:05:2F:BD:A8
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:23 dropped:0 overruns:0 carrier:52
Kollisionen:0 Sendewarteschlangenl�nge:100
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:11 Basisadresse:0xbc00
ippp0 Protokoll:Punkt-zu-Punkt Verbindung
inet Adresse:192.168.100.1 P-z-P:192.168.100.2
Maske:255.255.255.255 UP PUNKTZUPUNKT RUNNING NOARP MTU:1500
Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenl�nge:30
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
lo Protokoll:Lokale Schleife
inet Adresse:127.0.0.1 Maske:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:496 errors:0 dropped:0 overruns:0 frame:0
TX packets:496 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenl�nge:0
RX bytes:38546 (37.6 Kb) TX bytes:38546 (37.6 Kb)
Das hei�t doch wohl da� eth0 keine IP-Adresse hat, oder ?
[root@koekdv michael]# rpm -qa | grep isdn
isdn4k-utils-3.1-1.pre1.9mdk
isdn4net-1.4.5-3mdk
libisdn4k-utils2-3.1-1.pre1.9mdk
Die m��te man dann deinstallieren ?
[root@koekdv michael]# isdnctrl list ippp0
Current setup of interface 'ippp0':
EAZ/MSN: 067346713
Phone number(s):
Outgoing: 019231750 1019 0
Incoming:
Dial mode: auto
[root@koekdv michael]# isdnctrl list ppp0
Secure: on
Callback: offCurrent setup of interface 'ppp0':
Reject before Callback: off
Callback-delay: 5EAZ/MSN:
Dialmax: 3Phone number(s):
Hangup-Timeout: 180 Outgoing:
Incoming-Hangup: on Incoming:
ChargeHangup: offDial mode: manual
Charge-Units: 0Secure: off
Charge-Interval: 0Callback: off
Layer-2-Protocol: hdlcReject before Callback: on
Layer-3-Protocol: transCallback-delay: 5
Encapsulation: syncpppDialmax: 1
Slave Interface: NoneHangup-Timeout: 10
Slave delay: 10Incoming-Hangup: on
Slave trigger: 6000 cpsChargeHangup: off
Master Interface: NoneCharge-Units: 0
Pre-Bound to: NothingCharge-Interval: 0
PPP-Bound to: 0Layer-2-Protocol: x75i
Layer-3-Protocol: trans
Encapsulation: rawip
Slave Interface: None
Slave delay: 10
Slave trigger: 6000 cps
Master Interface: None
Pre-Bound to: Nothing
PPP-Bound to: Nothing
/var/log/daemons/errors ergab:
Jun 2 11:21:13 koekdv devfsd[65]: error calling: "unlink" in "GLOBAL"
Jun 2 09:21:22 koekdv modprobe: modprobe: Can't locate module eth1
..........
Jun 2 09:21:22 koekdv modprobe: modprobe: Can't locate module eth9
Jun 2 09:22:43 koekdv xinetd[1350]: chargen disabled, removing
..............
Jun 2 09:22:43 koekdv xinetd[1350]: time disabled, removing
Jun 2 09:22:43 koekdv xinetd[1350]: ftp disabled, removing
Jun 2 09:22:50 koekdv gpm[1702]: imps2: PS/2 mouse failed to read id,
assuming standard PS/2
Jun 2 09:22:50 koekdv gpm[1702]: imps2: PS/2 mouse failed setup,
continuing...
/var/log/daemons/info ergab:
Jun 2 09:11:48 koekdv Font Server[1773]: terminating
Jun 2 09:11:50 koekdv named[1285]: shutting down
Jun 2 09:11:50 koekdv named[1285]: no longer listening on 127.0.0.1#53
Jun 2 09:11:50 koekdv named[1276]: exiting
Jun 2 09:11:51 koekdv apmd[1226]: Exiting
Jun 2 09:22:41 koekdv apmd[1226]: Version 3.0final (APM BIOS 1.2, Linux
driver 1.16)
Jun 2 09:22:41 koekdv apmd[1226]: Charge: * * * (-1% unknown)
Jun 2 09:22:41 koekdv named[1276]: starting BIND 9.2.0 -u named
Jun 2 09:22:41 koekdv named[1276]: using 1 CPU
Jun 2 09:22:41 koekdv named[1285]: loading configuration from
'/etc/named.conf'
Jun 2 09:22:42 koekdv named[1285]: no IPv6 interfaces found
Jun 2 09:22:42 koekdv named[1285]: listening on IPv4 interface lo,
127.0.0.1#53
Jun 2 09:22:42 koekdv named[1285]: couldn't add command channel
127.0.0.1#953: not found
Jun 2 09:22:42 koekdv named[1285]: zone 0.0.127.in-addr.arpa/IN: loaded
serial 2002053000
Jun 2 09:22:42 koekdv named[1285]: zone 0.168.192.in-addr.arpa/IN:
loaded serial 2002053000
Jun 2 09:22:42 koekdv named[1285]: zone inter.net/IN: loaded serial
2002053000
/var/log/daemons/warnings ergab:
Jun 2 07:52:15 koekdv xinetd[1351]: Exiting...
Jun 2 07:54:31 koekdv named[1285]: 127.0.0.rev:8: no TTL specified;
using SOA MINTTL instead
Jun 2 07:54:32 koekdv xinetd[1350]: Service ftp: attribute already set:
disable [line=16]
Jun 2 08:03:01 koekdv xinetd[1350]: Exiting...
Jun 2 08:41:41 koekdv named[1285]: 127.0.0.rev:8: no TTL specified;
using SOA MINTTL instead
Jun 2 08:41:42 koekdv xinetd[1350]: Service ftp: attribute already set:
disable [line=16]
Jun 2 09:11:50 koekdv xinetd[1350]: Exiting...
Jun 2 09:22:42 koekdv named[1285]: 127.0.0.rev:8: no TTL specified;
using SOA MINTTL instead
Jun 2 09:22:43 koekdv xinetd[1350]: Service ftp: attribute already set:
disable [line=16]
/var/log/bootlog ergab:
Jun 2 07:07:18 koekdv rc: Starten des isdn4linux Dienstes: succeeded
Jun 2 07:07:18 koekdv network: Setzen der Netzwerk Parameter: succeeded
Jun 2 07:07:19 koekdv network: Schnittstelle �lo� aktivieren: succeeded
Jun 2 07:07:19 koekdv ifup: Determining IP information for eth0...
Jun 2 07:08:19 koekdv ifup: failed.
Jun 2 07:08:19 koekdv network: Schnittstelle �eth0� aktivieren: failed
Jun 2 07:08:20 koekdv ifup: Determining IP information for ppp0...
Jun 2 07:08:20 koekdv ifup: failed.
Jun 2 07:08:20 koekdv network: Schnittstelle �ppp0� aktivieren: failed
Jun 2 07:08:20 koekdv internet: Checking internet connections to start
at boot succeeded
Jun 2 07:08:20 koekdv portmap: portmap start succeeded
Danke im Voraus
Michael Bischof
----------------------------------------------------------------------------
PUG - Penguin User Group Wiesbaden - http://www.pug.org
