Hallo! * Schmitt, Martin (Dregis STB C) wrote/schrieb: > > > -- ssh mit RSA-Auth - egal welches Howto (auch das aus dem > > Archiv) nix funktioniert > > > > ssh2? Damit habe ich es auch nicht mehr hingebracht > > Was daran liegen k�nnte, da� man f�r SSH2 neue Keys braucht. > > Ich habe grade beim Kunden F-Secure SSH2 "ausgerollt", wenn Du also Fragen > hast: Bitte. ;-)
Du hast es so gewollt! Also: alle M�glichen HOWTOs-befolgt, ich geb dir mal die Ausgabe: ssh -2 192.168.1.100 -vv OpenSSH_3.4p1, SSH protocols 1.5/2.0, OpenSSL 0x0090602f debug1: Reading configuration data /etc/ssh_config debug1: Applying options for * debug1: Rhosts Authentication disabled, originating port will not be trusted. debug1: ssh_connect: needpriv 0 debug1: Connecting to 192.168.1.100 [192.168.1.100] port 22. debug1: Connection established. debug1: identity file /Users/mainuser/.ssh/identity type 0 debug2: key_type_from_name: unknown key type '-----BEGIN' debug2: key_type_from_name: unknown key type 'Proc-Type:' debug2: key_type_from_name: unknown key type 'DEK-Info:' debug2: key_type_from_name: unknown key type '-----END' debug1: identity file /Users/mainuser/.ssh/id_dsa type 2 debug2: key_type_from_name: unknown key type '-----BEGIN' debug2: key_type_from_name: unknown key type '-----END' debug1: identity file /Users/mainuser/.ssh/id_rsa type 1 debug1: Remote protocol version 2.0, remote software version OpenSSH_3.4p1 Debian 1:3.4p1-1 debug1: match: OpenSSH_3.4p1 Debian 1:3.4p1-1 pat OpenSSH* Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_3.4p1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,[EMAIL PROTECTED] debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,[EMAIL PROTECTED] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none debug2: kex_parse_kexinit: none debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,[EMAIL PROTECTED] debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,[EMAIL PROTECTED] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,zlib debug2: kex_parse_kexinit: none,zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_init: found hmac-md5 debug1: kex: server->client aes128-cbc hmac-md5 none debug2: mac_init: found hmac-md5 debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: dh_gen_key: priv key bits set: 124/256 debug1: bits set: 1597/3191 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '192.168.1.100' is known and matches the RSA host key. debug1: Found key in /Users/mainuser/.ssh/known_hosts:1 debug1: bits set: 1612/3191 debug1: ssh_rsa_verify: signature correct debug1: kex_derive_keys debug1: newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: waiting for SSH2_MSG_NEWKEYS debug1: newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: done: ssh_kex2. debug1: send SSH2_MSG_SERVICE_REQUEST debug1: service_accept: ssh-userauth debug1: got SSH2_MSG_SERVICE_ACCEPT debug1: authentications that can continue: publickey,password,keyboard-interactive,hostbased debug1: next auth method to try is hostbased debug2: userauth_hostbased: chost evolution.localhome. debug1: ssh_keysign called debug2: we sent a hostbased packet, wait for reply debug1: Remote: Found garbage in /etc/hosts.equiv. debug1: authentications that can continue: publickey,password,keyboard-interactive,hostbased debug2: userauth_hostbased: chost evolution.localhome. debug1: ssh_keysign called debug2: we sent a hostbased packet, wait for reply debug1: Remote: Found garbage in /etc/hosts.equiv. debug1: authentications that can continue: publickey,password,keyboard-interactive,hostbased debug1: userauth_hostbased: no more client hostkeys debug2: we did not send a packet, disable method debug1: next auth method to try is publickey debug1: try pubkey: /Users/mainuser/.ssh/id_dsa debug2: we sent a publickey packet, wait for reply debug1: authentications that can continue: publickey,password,keyboard-interactive,hostbased debug1: try pubkey: /Users/mainuser/.ssh/id_rsa debug2: we sent a publickey packet, wait for reply debug1: authentications that can continue: publickey,password,keyboard-interactive,hostbased debug2: we did not send a packet, disable method debug1: next auth method to try is keyboard-interactive debug2: userauth_kbdint debug2: we sent a keyboard-interactive packet, wait for reply debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 1 Password: OK? - sorry wgn. langem, text Gru� //Robert -- ,-----------------------------------------------------------------------------. > Robert Weissgraeber | If it doesn't work, force it. < > [EMAIL PROTECTED] | If it breaks, it needed replacing anyway. < `-----------------------------------------------------------------------------' ---------------------------------------------------------------------------- PUG - Penguin User Group Wiesbaden - http://www.pug.org
