logbuch des verzweifelten gentoo-noobs, sternzeit mirdochegal, nachtrag:
pnp ist in diesem verkrueppelten bios nicht einzustellen. da ist fast nix
drin ausser der boot-reinfolge und nem passwortschutz.
rc-update del netmount erspart mir die fehlermeldung, ist aber kein
unterschied, die hatte ich ja eben auch draussen.
@martin: in dmesg kommt eth0 als 8139 chip vor, aber ich bin mir sehr sicher
das mit ifconfig manuell zu uppen ausprobiert zu haben.
dmesg ausgabe ist im anhang.
wenn keinem mehr was einfaellt werde ich mal versuchen zusaetzlich einen
gen-kernel zu kompilieren. der soll ja genauso sein wie der von der livecd
--
Moritz Bellach
Baumgartenstr. 36
65232 Taunusstein
10 GB Mailbox, 100 FreeSMS http://www.gmx.net/de/go/topmail
+++ GMX - die erste Adresse f�r Mail, Message, More +++
BEGIN:VCARD
VERSION:2.1
ADR;HOME:;;Baumgartenstr. 36;Taunusstein;;65232;DE
BDAY:19860814
EMAIL;PREF;INTERNET;H:[EMAIL PROTECTED]
FN:Moritz Bellach
LABEL;HOME:Baumgartenstr. 36
Taunusstein, 65232
DE
N:Bellach;Moritz;;;;
TEL;HOME;VOICE:06128968693
TEL;PREF;CELL;VOICE;H:01791041564
REV:20050128T123507Z
END:VCARD
Linux version 2.4.28-gentoo-r5 ([EMAIL PROTECTED]) (gcc version 3.3.5 (Gentoo
Linux 3.3.5-r1, ssp-3.3.2-3, pie-8.7.7.1)) #6 Thu Jan 27 20:02:25 CET 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fffffc0 (ACPI data)
BIOS-e820: 000000001fffffc0 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 OID_00 ) @ 0x000e6010
ACPI: RSDT (v001 INSYDE RSDT_000 0x00000001 _CSI 0x00010101) @ 0x1fffa7f0
ACPI: FADT (v001 ACER DCL56 0x00000200 _CSI 0x00010101) @ 0x1ffffb00
ACPI: BOOT (v001 INSYDE SYS_BOOT 0x00000100 _CSI 0x00010101) @ 0x1ffffb90
ACPI: DBGP (v001 INSYDE DBGP_000 0x00000100 _CSI 0x00010101) @ 0x1ffffbc0
ACPI: SSDT (v001 INSYDE GV3Ref 0x00002000 INTL 0x20021002) @ 0x1fffa830
ACPI: DSDT (v001 ACER TM_290 0x00000006 MSFT 0x0100000e) @ 0x00000000
Kernel command line: root=/dev/hda3 vga=795
Initializing CPU#0
Detected 1495.189 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 2981.88 BogoMIPS
Memory: 515112k/524224k available (2042k kernel code, 8724k reserved, 324k
data, 116k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I cache: 32K, L1 D cache: 32K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: afe9f9bf 00000000 00000000 00000000
CPU: Common caps: afe9f9bf 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) M processor 1.50GHz stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: IRQ9 SCI: Edge set to Level Trigger.
POSIX conformance testing by UNIFIX
ACPI: Subsystem revision 20040326
PCI: PCI BIOS revision 2.10 entry at 0xe97a4, last bus=2
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S3 S4bios S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10) *11
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10) *11
ACPI: Embedded Controller [EC0] (gpe 28)
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: Using ACPI for IRQ routing
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
ACPI: AC Adapter [ACAD] (off-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Processor [CPU0] (supports C1 C2 C3, 2 performance states, 8 throttling
states)
vesafb: framebuffer at 0xa8000000, mapped to 0xe080d000, size 7680k
vesafb: mode is 1280x1024x24, linelength=3840, pages=16
vesafb: protected mode interface info at c000:5673
vesafb: scrolling: redraw
vesafb: directcolor: size=0:8:8:8, shift=0:16:8:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb1: VGA16 VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI
enabled
ttyS01 at 0x02f8 (irq = 3) is a 16550A
PC110 digitizer pad at 0x15E0, irq 10.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Intel(R) 855PM chipset
agpgart: AGP aperture is 64M @ 0xb0000000
[drm] AGP 0.99 Aperture @ 0xb0000000 64MB
[drm] Initialized radeon 1.7.0 20020828 on minor 0
[drm] AGP 0.99 Aperture @ 0xb0000000 64MB
[drm] Initialized i810 1.2.1 20020211 on minor 1
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 00:1f.1
PCI: Enabling device 00:1f.1 (0005 -> 0007)
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio
hda: IC25N060ATMR04-0, ATA DISK drive
blk: queue c03ec480, I/O limit 4095Mb (mask 0xffffffff)
hdc: TOSHIBA ODD-DVD SD-R6372, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 117210240 sectors (60012 MB) w/7884KiB Cache, CHS=7296/255/63, UDMA(100)
hdc: attached ide-cdrom driver.
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
es1371: version v0.32 time 20:04:00 Jan 27 2005
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
usb.c: registered new driver hub
Yenta ISA IRQ mask 0x0008, PCI irq 0
Socket status: 30000006
PCI: Setting latency timer of device 00:1d.7 to 64
ehci_hcd 00:1d.7: Intel Corp. 82801DB USB2
hcd.c: request interrupt 10 failed
hcd.c: init 00:1d.7 fail, -16
host/uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Setting latency timer of device 00:1d.0 to 64
host/uhci.c: USB UHCI at I/O 0x1200, IRQ 10
usb.c: new USB bus registered, assigned bus number 1
PCI: Setting latency timer of device 00:1d.1 to 64
host/uhci.c: USB UHCI at I/O 0x1600, IRQ 10
usb.c: new USB bus registered, assigned bus number 2
PCI: Setting latency timer of device 00:1d.2 to 64
host/uhci.c: USB UHCI at I/O 0x1700, IRQ 10
usb.c: new USB bus registered, assigned bus number 3
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 116k freed
Adding Swap: 506036k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 at 0xe0ff2000, 00:02:3f:18:08:55, IRQ 10
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
