Hallo Liste,
dass das Brennen bei mir mit einem 2.6er Kernel unter Mandriva nicht ging
hatte ich geschrieben. Soeben habe ich mit SLAX 5.1.8rc gebrannt, einem
Howto-Tip von dort folgend. Wie man sieht:
statt dev=0,0,0 einzugeben (die Ausgabe von cdrecord -scanbus war auch utner
diesem Slax fehlerhaft!) gab es folgendes Kommando:
und das klappte - die CD war bootfähig!
Gruß,
Michael Bischof
---------------------------------
[EMAIL PROTECTED]:/usr/X11R6/bin# cdrecord dev=/dev/cdrom -v -multi
-tao /mnt/hdb6/slax-killbill-5.0.6.iso
Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
cdrecord: Warning: Running on Linux-2.6.16
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
TOC Type: 3 = CD-ROM XA mode 2
scsidev: '/dev/cdrom'
devname: '/dev/cdrom'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'CyberDrv'
Identifikation : 'CW038D CD-R/RW '
Revision : '120C'
Device seems to be: Generic mmc CD-RW.
Current: 0x0009
Profile: 0x000A
Profile: 0x0009 (current)
Profile: 0x0008
Profile: 0x0002 (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1806336 = 1764 KB
cdrecord: Success. read buffer: scsi sendcmd: no error
CDB: 3C 00 00 00 00 00 00 FC 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 20 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x20 Qual 0x00 (invalid command operation code) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 64512
cmd finished after 0.000s timeout 40s
FIFO size : 4194304 = 4096 KB
Track 01: data 188 MB
Total size: 216 MB (21:27.82) = 96587 sectors
Lout start: 216 MB (21:29/62) = 96587 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, low Beta category (A-) (2)
ATIP start of lead in: -12508 (97:15/17)
ATIP start of lead out: 359845 (79:59/70)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359845 Blocks current: 359845 Blocks remaining: 263258
Starting to write CD/DVD at speed 16 in real TAO mode for multi session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Turning BURN-Free off
Performing OPC...
Starting new track at sector: 0
Track 01: 188 of 188 MB written (fifo 100%) [buf 95%] 16.3x.
Track 01: Total bytes read/written: 197806080/197806080 (96585 sectors).
Writing time: 109.374s
Average write speed 12.3x.
Min drive buffer fill was 95%
Fixating...
Fixating time: 26.211s
cdrecord: fifo had 3116 puts and 3116 gets.
cdrecord: fifo was 0 times empty and 2983 times full, min fill was 90%.
> Am Sonntag, 27. August 2006 14:30 schrieb Klaus Klein:
>
> Bei mir hier sieht es auch so aus:
> [EMAIL PROTECTED] ~]# cdrecord -version
> Cdrecord-Clone 2.01.01a03-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2005
> Jörg Schilling
> Note: This version is an unofficial (modified) version with DVD support
> Note: and therefore may have bugs that are not present in the original.
> Note: Please send bug reports or support requests to warly at mandriva.com.
> Note: The author of cdrecord should not be bothered with problems in this
> version.
>
> Aber, nicht einmal als root klappt es:
>
>
> [EMAIL PROTECTED] ~]# cdrecord -v -eject speed=8 dev=/dev/hdc
> /mnt/hdb8/slax-killbill-5.1.8rc.iso
> cdrecord: No write mode specified.
> cdrecord: Asuming -tao mode.
> cdrecord: Future versions of cdrecord may have different drive dependent
> defaults.
> Cdrecord-Clone 2.01.01a03-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2005
> J�g Schilling
> Note: This version is an unofficial (modified) version with DVD support
> Note: and therefore may have bugs that are not present in the original.
> Note: Please send bug reports or support requests to warly at mandriva.com.
> Note: The author of cdrecord should not be bothered with problems in this
> version.
> TOC Type: 1 = CD-ROM
> scsidev: '/dev/hdc'
> devname: '/dev/hdc'
> scsibus: -2 target: -2 lun: -2
> Warning: Open by 'devname' is unintentional and not supported.
> Linux sg driver version: 3.5.27
> SCSI buffer size: 64512
> Using libscg version 'schily-0.8'.
> atapi: 1
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 1
> Vendor_info : 'CyberDrv'
> Identifikation : 'CW038D CD-R/RW '
> Revision : '120C'
> Device seems to be: Generic mmc CD-RW.
> Current: 0x0009
> Profile: 0x000A
> Profile: 0x0009 (current)
> Profile: 0x0008
> Profile: 0x0002 (current)
> Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
> Driver flags : MMC-2 SWABAUDIO BURNFREE
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
> Drive buf size : 1806336 = 1764 KB
> cdrecord: Success. read buffer: scsi sendcmd: no error
> CDB: 3C 00 00 00 00 00 00 FC 00 00
> status: 0x4 (CONDITION MET/GOOD)
> resid: 64512
> cmd finished after 30.045s timeout 40s
> FIFO size : 4194304 = 4096 KB
> Track 01: data 207 MB
> Total size: 238 MB (23:34.90) = 106118 sectors
> Lout start: 238 MB (23:36/68) = 106118 sectors
>
> <= Hier hing die Maschine mehrere Minuten!
>
> Wenn man k3b als root aufruft kommt:
>
> [EMAIL PROTECTED] ~]# k3b > /home/michael/Desktop/k3b.bericht.txt
> DCOPClient::attachInternal. Attach failed Could not open network socket
> DCOPClient::attachInternal. Attach failed Could not open network socket
> kbuildsycoca running...
> [EMAIL PROTECTED] ~]# k3b: ERROR: (K3bDevice::Device) Unable to do inquiry.
>
> k3b: ERROR: (K3bDevice::Device) Unable to do inquiry.
> k3b: ERROR: (K3bDevice::Device) Unable to do inquiry.
>
> kio (KIOConnection): ERROR: Could not write data
> kio (KIOConnection): ERROR: Could not write data
--
----------------------------------------------------------------------------
PUG - Penguin User Group Wiesbaden - http://www.pug.org
