> >> Welcher init-Ersatz wurde denn eingesetzt (z.B. upstart, initng)? Ich >> habe auf der Website nichts Passendes gefunden.
Hi, sieh Dir dazu noch das an - wie die Jungs von Sidux das machen weiß ich nicht, jedenfalls ist es noch (!) schneller als Knoppix, bisher mein Performanz-Meister und -maßstab: Ein wenig OT, aber Du hast Dich schon immer für Performanz interessiert und bist heute daheim. Also sollst Du ruhig ein wenig träumen! Es geht nicht ums Booten, wohlgemerkt. Hier die Ergebnisse von Sidux: [EMAIL PROTECTED]:~# hdparm -tT /dev/hdb /dev/hdb: Timing cached reads: 312 MB in 2.01 seconds = 155.40 MB/sec Timing buffered disk reads: 164 MB in 3.07 seconds = 53.49 MB/sec [EMAIL PROTECTED]:~# hdparm -v /dev/hdb /dev/hdb: multcount = 16 (on) IO_support = 1 (32-bit) unmaskirq = 1 (on) using_dma = 1 (on) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 65535/16/63, sectors = 156301488, start = 0 [EMAIL PROTECTED]:~# hdparm -tT /dev/hda /dev/hda: Timing cached reads: 302 MB in 2.00 seconds = 150.97 MB/sec Timing buffered disk reads: 160 MB in 3.02 seconds = 53.00 MB/sec [EMAIL PROTECTED]:~# hdparm -v /dev/hda /dev/hda: multcount = 16 (on) IO_support = 1 (32-bit) unmaskirq = 1 (on) using_dma = 1 (on) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 65535/16/63, sectors = 156301488, start = 0 Und hier die von Mandriva Spring 2007.1: [EMAIL PROTECTED] ~]# hdparm -tT /dev/hdb /dev/hdb: Timing cached reads: 280 MB in 2.00 seconds = 139.78 MB/sec Timing buffered disk reads: 80 MB in 3.08 seconds = 26.00 MB/sec [EMAIL PROTECTED] ~]# hdparm -v /dev/hdb /dev/hdb: multcount = 16 (on) IO_support = 1 (32-bit) unmaskirq = 1 (on) using_dma = 1 (on) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 65535/16/63, sectors = 156301488, start = 0 [EMAIL PROTECTED] ~]# hdparm -tT /dev/hda /dev/hda: Timing cached reads: 284 MB in 2.01 seconds = 141.34 MB/sec Timing buffered disk reads: 82 MB in 3.02 seconds = 27.15 MB/sec [EMAIL PROTECTED] ~]# hdparm -v /dev/hda /dev/hda: multcount = 16 (on) IO_support = 1 (32-bit) unmaskirq = 1 (on) using_dma = 1 (on) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 65535/16/63, sectors = 156301488, start = 0 -- ---------------------------------------------------------------------------- PUG - Penguin User Group Wiesbaden - http://www.pug.org -- ---------------------------------------------------------------------------- PUG - Penguin User Group Wiesbaden - http://www.pug.org
