Dieter Ries wrote:
> Nathanael Schweers schrieb:
>> Hi Leute, Ich finde eine bestimmte Kernel option nicht.
>> Ich brauche wegen meines wlan Treibers die Kernel optionen
>> CONFIG_IEEE80211_CRYPT_CCMP und CONFIG_IEEE80211_CRYPT_TKIP.
>> Das dumme ist bloß dass Ich keine Ahnung hab wo in menuconfig man die
>> findet, und wenn Ich sie einfach zur .config hinzufüge (ja, das '=y' hab
>> Ich nicht vergessen) verschwindet die Option sofort.
>> Ich hab mal ein bisschen dannach gegoogelt und habe rausgefunden dass
>> die Option als obsolet gilt. Kann es sein dass es im Kernel gar nicht
>> mehr drin ist? Kernelversion ist "linux-2.6.30-gentoo-r4".
> 
> Kann es sein, dass deine Karte hier dabei ist:
> 
> Device drivers --->
>   [*] Staging drivers  --->
>     [ ] Exclude Staging drivers from being built
>     <M> RealTek RTL8187SE Wireless LAN NIC driver
>     <M> RealTek RTL8192SU Wireless LAN NIC driver
Nein, sieht nicht so aus als ob die dabei wäre.
> 
> Falls nicht, was ist das denn für ne Karte?

# lspci | grep -i network
03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG
Network Connection (rev 02)

Ich hab halt bisher den net-wireless/ipw3945 installieren wollen. Die
deps gingen auch alle, aber das packet selbst geht dann nicht, bricht
genauer gesagt mit folgender meldung ab:

* Checking for suitable kernel configuration options...
 *   ipw3945-1.2.2 requires support for Generic IEEE 802.11 Networking
Stack (CONFIG_IEEE80211).
 *   CONFIG_IEEE80211_CRYPT_CCMP:        is not set when it should be.
 *   CONFIG_IEEE80211_CRYPT_TKIP:        is not set when it should be.
 * Please check to make sure these options are set correctly.
 * Failure to do so may cause unexpected problems.
 * Once you have satisfied these options, please try merging
 * this package again.
 *
 * ERROR: net-wireless/ipw3945-1.2.2-r1 failed.
 * Call stack:
 *                 ebuild.sh, line   49:  Called pkg_setup
 *   ipw3945-1.2.2-r1.ebuild, line   42:  Called linux-mod_pkg_setup
 *          linux-mod.eclass, line  578:  Called linux-info_pkg_setup
 *         linux-info.eclass, line  720:  Called check_extra_config
 *         linux-info.eclass, line  615:  Called die
 * The specific snippet of code:
 *              die "Incorrect kernel configuration options"
 *  The die message:
 *   Incorrect kernel configuration options
 *
 * If you need support, post the topmost build error, and the call stack
if relevant.
 * A complete build log is located at
'/var/tmp/portage/net-wireless/ipw3945-1.2.2-r1/temp/build.log'.
 * The ebuild environment file is located at
'/var/tmp/portage/net-wireless/ipw3945-1.2.2-r1/temp/die.env'.
 *

> 
>> Gruß, Nathanael
> 
> cu
> Dieter
> --
> ----------------------------------------------------------------------------
> PUG - Penguin User Group Wiesbaden - http://www.pug.org

--
----------------------------------------------------------------------------
PUG - Penguin User Group Wiesbaden - http://www.pug.org

Antwort per Email an