I agree that is what makes Talks a very powerful screen reader for the
phone. There is a lot you can do with it if a person is willing to try
things.
Signed: Stephen Giggar
Skype: dr-phone.
Hardware eventually fails, software eventually works.
No amount of bandwidth can fix poor design.
----- Original Message -----
From: "Malcolm Parfitt" <[email protected]>
To: "Talks Mailing List" <[email protected]>
Sent: Friday, October 15, 2010 4:42 PM
Subject: Re: [Talks] Problem after updating my E71.
Quite right Soft Key 2 was what I meant, it's been a long day. Training it
as focus reads it out as expected. Not sure where the actual focus was.
Just goes to show how flexible Talks is. Playing around really does pay
off.
Malcolm
Produced on a Nokia E71
-original message-
Subject: Re: [Talks] Problem after updating my E71.
From: "Stephen Giggar" <[email protected]>
Date: 15/10/2010 22:33
Well Talks SoftKey2 is for the signal, battery, and other status
information. If that is what you are pressing, then I can see what it
isn't
reading what you expect. <smile>
If you can see this information in the object viewer! Then you can set a
role yourself maybe so that it will read it. Set the role to Focus or
subtitle for now. Lets us know how you get on.
Signed: Stephen Giggar
Skype: dr-phone.
Hardware eventually fails, software eventually works.
No amount of bandwidth can fix poor design.
----- Original Message -----
From: "Malcolm Parfitt" <[email protected]>
To: <[email protected]>
Sent: Friday, October 15, 2010 2:52 PM
Subject: [Talks] Problem after updating my E71.
I wonder if any list member can shed any light on the following issue.
I have just updated my E71 to firmware 501.21.001.
I am using Talks 5.01.1. All works fine except for one thing. When a
call
is received pressing Soft Key 2 silences the ringtone but the caller's
name
or number is not read out. Talks and up arrow does not read it either.
Furthermore Caller ID does not work either. The ringtone is set to
ringing.
All Talks and phone settings are as they were before the update. I did
not
do a restore from memory after the update just copied contacts back to
phone
memory as that was all I wanted to keep.
I have tried all tts engines but that makes no difference.
The only thing I can think of is that as the phone rings, the I can see
the
name using the Object Viewer. Perhaps this can be given an appropriate
role
to be read with Talks Soft Key 2?
As any list member any suggestions?
Malcolm
__________ Information from ESET Smart Security, version of virus
signature
database 5535 (20101015) __________
The message was checked by ESET Smart Security.
http://www.eset.com
_______________________________________________
Talks mailing list
[email protected]
http://lists.talksusers.com/mailman/listinfo/talks
Hosting of this list provided courtesy of:
eHosting Limited: http://www.ehosting.com/
and
Talknav Inc. http://www.talknav.net/
_______________________________________________
Talks mailing list
[email protected]
http://lists.talksusers.com/mailman/listinfo/talks
Hosting of this list provided courtesy of:
eHosting Limited: http://www.ehosting.com/
and
Talknav Inc. http://www.talknav.net/
_______________________________________________
Talks mailing list
[email protected]
http://lists.talksusers.com/mailman/listinfo/talks
Hosting of this list provided courtesy of:
eHosting Limited: http://www.ehosting.com/
and
Talknav Inc. http://www.talknav.net/
_______________________________________________
Talks mailing list
[email protected]
http://lists.talksusers.com/mailman/listinfo/talks
Hosting of this list provided courtesy of:
eHosting Limited: http://www.ehosting.com/
and
Talknav Inc. http://www.talknav.net/
