That will only work if that was the last thing spoken. If anything else is done that results in speech output after the result is given, then that will not work. The Talks up arrow and or Talks select is the best way to insure you read what is on the line or screen. There is also a Talks followed by a long pound/number/hash to say phrase before last. But again all of this is in training mode.
Signed: Stephen Giggar Skype: dr-phone. Hardware eventually fails, software eventually works. No amount of bandwidth can fix poor design. -original message- Subject: Re: [Talks] calculator key query From: "padmanabham" <[email protected]> Date: 06/01/2011 7:15 PM press talks key and # key. ----- Original Message ----- From: "Estelita" <[email protected]> To: "Talks Mailing List" <[email protected]> Sent: Friday, January 07, 2011 3:24 AM Subject: [Talks] calculator key query > Hello, > Using my N86 calculator, is there a key for Talks to repeat the > calculation results? > I tried pressing the Up/Down/Left/Right key, but it didn't help. > Any information is very much appreciated. > Thank you, > > Estelita > _______________________________________________ > Talks mailing list > [email protected] > http://lists.talksusers.com/mailman/listinfo/talks > > Hosting of this list provided courtesy of: > eHosting Limited: http://www.ehosting.com/ > and > Talknav Inc. http://www.talknav.net/ _______________________________________________ Talks mailing list [email protected] http://lists.talksusers.com/mailman/listinfo/talks Hosting of this list provided courtesy of: eHosting Limited: http://www.ehosting.com/ and Talknav Inc. http://www.talknav.net/ _______________________________________________ Talks mailing list [email protected] http://lists.talksusers.com/mailman/listinfo/talks Hosting of this list provided courtesy of: eHosting Limited: http://www.ehosting.com/ and Talknav Inc. http://www.talknav.net/
