Adelina
Did you try doing a Talks followed by down arrow? This should read the whole
message from the start to the finish.
If you want to arrow through the message, then you need to change your
cursor type to either Letters or Words. This can be done with a Talks
followed by a long press of number 2. Yes I said a number 2 and not
SoftKey2.
Signed: Stephen Giggar
Skype: dr-phone.
Hardware eventually fails, software eventually works.
No amount of bandwidth can fix poor design.
----- Original Message -----
From: "Adelina Zepeda" <[email protected]>
To: <[email protected]>
Sent: Tuesday, March 29, 2011 1:37 PM
Subject: [Talks] Talks question
Hi all well I have the latest talks installed now and I was wondering how
do I get talks to speak the whole message when reading a text message. The
message only reads some of the message and not all when arrowing down and
before it did read the whole thing so what do I check or change so it can
read the whole message when arrowing down? Please help thanks
Adelina
_______________________________________________
Talks mailing list
[email protected]
http://lists.talksusers.com/mailman/listinfo/talks
Hosting of this list provided courtesy of:
eHosting Limited: http://www.ehosting.com/
and
Talknav Inc. http://www.talknav.net/
_______________________________________________
Talks mailing list
[email protected]
http://lists.talksusers.com/mailman/listinfo/talks
Hosting of this list provided courtesy of:
eHosting Limited: http://www.ehosting.com/
and
Talknav Inc. http://www.talknav.net/
