> Ini yg didapat dari /var/log/message :
>
> Dec 15 15:17:40 myhost kernel: scsi0 : SCSI host adapter emulation for
> IDE ATAPI devices
>
> Ini pesan errornya :
>
> bash-2.05b# /opt/schily/bin/cdrecord -scanbus
> Cdrecord 2.00.3 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J?rg Schilling
> /opt/schily/bin/cdrecord: No such file or directory. Cannot open
> '/dev/pg*'. Cannot open SCSI driver.
> /opt/schily/bin/cdrecord: For possible targets try 'cdrecord -scanbus'.
> Make sure you are root.
> /opt/schily/bin/cdrecord: For possible transport specifiers try
> 'cdrecord dev=help'.
>
coba baca petikan link terdahulu :
Results like the preceding are typically caused by ide-scsi, scsi_cd or
similar modules not being loaded or not being loaded correctly. Run the
rmmod command several times until told it's not loaded:
[EMAIL PROTECTED] root]# rmmod ide-scsi
[EMAIL PROTECTED] root]# rmmod ide-scsi
rmmod: module ide-scsi is not loaded
[EMAIL PROTECTED] root]#
Now load the ide-scsi module as follows:
[EMAIL PROTECTED] root]# insmod ide-scsi
Using /lib/modules/2.4.8-26mdk/kernel/drivers/scsi/ide-scsi.o.gz
[EMAIL PROTECTED] root]#
Then run cdrecord -scanbus again. If it presents you with a SCSI device
number, continue to the next section. Otherwise, review all the
configuration steps and try variations on /etc/modules.conf. Be sure after
changing /etc/lilo.conf you really ran lilo, and ran it successfully.
^^^^
goodluck !
salam
arif
-------------------------
http://www.pasarlinux.com
--
Unsubscribe: kirim email kosong ke [EMAIL PROTECTED]
Arsip dan info di http://linux.or.id/milis.php
FAQ milis http://linux.or.id/faq.php
