Dear all, Saya heran dengan routing table saya, kok ada routing ke 169.254.0.0/16 padahal saya tidak menambahkan routing tersebut di /etc/sysconfig/network-scripts/route-eth1 atau di /etc/sysconfig/networking/devices/eth1.route
Dimana lagi ada settingan untuk menambahkan routing tabel ? # /sbin/ip route 192.168.7.0/24 via 192.168.27.9 dev eth0 192.168.17.0/24 via 192.168.27.9 dev eth0 192.168.27.0/24 dev eth0 scope link 10.10.11.0/24 dev eth1 scope link 169.254.0.0/16 dev eth1 scope link 127.0.0.0/8 dev lo scope link default via 10.10.11.1 dev eth1 # /sbin/ip address 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 brd 127.255.255.255 scope host lo 2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 100 link/ether 00:30:f1:34:10:2c brd ff:ff:ff:ff:ff:ff inet 192.168.27.254/24 brd 192.168.27.255 scope global eth0 3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc htb qlen 100 link/ether 00:05:5d:81:25:06 brd ff:ff:ff:ff:ff:ff inet 10.10.11.254/24 brd 10.10.11.255 scope global eth1 # netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.7.0 192.168.27.9 255.255.255.0 UG 0 0 0 eth0 192.168.17.0 192.168.27.9 255.255.255.0 UG 0 0 0 eth0 192.168.27.0 * 255.255.255.0 U 0 0 0 eth0 10.10.11.0 * 255.255.255.0 U 0 0 0 eth1 169.254.0.0 * 255.255.0.0 U 0 0 0 eth1 127.0.0.0 * 255.0.0.0 U 0 0 0 lo default 10.10.11.1 0.0.0.0 UG 0 0 0 eth1 TIA -- Wassalamu'alaikum, emnaz .. -- Unsubscribe: kirim email kosong ke [EMAIL PROTECTED] Arsip dan info di http://linux.or.id/milis.php FAQ milis http://linux.or.id/faq.php