haloo rekan milis,
saya coba gunakan USB flash disk SANDISK 256 Mb 2.0,,setelah saya tancapkan dan jalankan dmesg pesannya sbb:
hub.c: new USB device 00:01.3-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x781/0x7104) is not claimed by any active driver.
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: Generic Model: STORAGE DEVICE Rev: 1033
Type: Direct-Access ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
USB Mass Storage support registered.
Artinya usb reader/disk anda sudah terdeteksi & berfungsi.
bagaimana caranya agar kernel bisa akses USB flash,,saya pake RH8.0 kernel udah saya update ke 2.4.20-28,,ato perlu paket tambahan agar berfungsi.
bikin mount directory sekali saja: # mkdir /mnt/usb # mount /dev/sda1 /mnt/usb jangan lupa sync/unmount sebelum disconnect
atau kalau lebhi senang cara DOS (requires: mtools sudah terinstalasi)
tambahkan dalam /etc/mtools.cnf drive U: file=/dev/sda1 exclusive
selanjutnya man tinggal pakai mdir mcopy mformat mmkdir, dsb.
more info: info --subnodes mtools | less
-- +-R-| Mozilla 1.6 Gecko20040116 |-H-| Powered by Linux 2.4.x |-9-+ |/v\ Agus Budy Wuysang MIS Department | | | Phone: +62-21-344-1316 ext 317 GSM: +62-816-1972-051 | +------------| http://www.fasw.co.id/person/supes/ |-------------+
-- Unsubscribe: kirim email kosong ke [EMAIL PROTECTED] Arsip dan info di http://linux.or.id/milis.php FAQ milis http://linux.or.id/faq.php
