Sebenernya bisa tanya ke milis tetangga "indocisco", tapi it's OK gak ada yg salah tuh ma messg-nya cuma interface itu statusnya down aja klo mo dipake harus di-up kan masuk ke cisco trus >en password: #conf t config#int s0 <<misal yg di config s0 config-s0#no shut config-s0#^Z #write
regards, -+Cahyo+- On Wed, 14 Jul 2004, satya wrote: :: :: ----- Original Message ----- :: From: "Imam Nursianto" <[EMAIL PROTECTED]> :: To: <[EMAIL PROTECTED]> :: Sent: Wednesday, July 07, 2004 5:14 PM :: Subject: [tanya-jawab] cisco router error :: :: line protocol down --> udah di setting di interfacenya dikasih no shutdown :: blom ? :: trus yang di serial juga jangan lupa dikasih no shutdown sama kalau dia :: berupa DCE Interfaces kasih clock ratenya :: klo nggak juga, bisa hapus startup confignya gak ?? trus copy konfigurasi :: dari router tetangganya ... :: :: :: > Numpang nanya tentang cisco router 2500 series yaa...ada error nih.... :: > setelah router booting seperti dibawah ini..... :: > :: ============================================================================ :: > == :: > 1 Ethernet/IEEE 802.3 interface. :: > 2 Serial network interfaces. :: > 32K bytes of non-volatile configuration memory. :: > 4096K bytes of processor board System flash (Read ONLY) :: > :: > :: > :: > Press RETURN to get started! :: > :: > :: > %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed state :: to :: > down :: > :: > %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state to :: > down :: > %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed state to :: > down :: > %LINK-3-UPDOWN: Interface Ethernet0, changed state to up :: > %LINK-3-UPDOWN: Interface Serial0, changed state to down :: > %LINK-3-UPDOWN: Interface Serial1, changed state to down :: > %SYS-5-CONFIG_I: Configured from memory by console :: > %SYS-5-RESTART: System restarted -- :: > Cisco Internetwork Operating System Software :: > IOS (tm) 3000 Software (IGS-I-L), Version 11.1(1), RELEASE SOFTWARE (fc1) :: > Copyright (c) 1986-1996 by cisco Systems, Inc. :: > Compiled Wed 21-Feb-96 02:43 by nitin :: > %LINK-5-CHANGED: Interface Serial1, changed state to administratively down :: > ========================================================================= :: > ada error....cisconya nggak mau jalan lagi tuh....kenapa yaa..? kayak hang :: > gitu..nggak nampilin pesan lagi? :(( :: > ada yang pernah punya experience dengan cisco nggak? kalau errornya kayak :: :: > gitu gimana cara mengatasinya? :: > terima kasih :: > imam :: > :: > :: > :: > -- :: > Unsubscribe: kirim email kosong ke [EMAIL PROTECTED] :: > Arsip dan info di http://linux.or.id/milis.php :: > FAQ milis http://linux.or.id/faq.php :: > :: > :: :: :: -- :: Unsubscribe: kirim email kosong ke [EMAIL PROTECTED] :: Arsip, FAQ, dan info milis di http://linux.or.id/milis.php :: Tidak bisa posting? Baca: :: http://linux.or.id/wiki/index.php?pagename=ProblemMilisDanSolusi :: http://linux.or.id/wiki/index.php?pagename=TataTertibMilis :: :: -- Unsubscribe: kirim email kosong ke [EMAIL PROTECTED] Arsip, FAQ, dan info milis di http://linux.or.id/milis.php Tidak bisa posting? Baca: http://linux.or.id/wiki/index.php?pagename=ProblemMilisDanSolusi http://linux.or.id/wiki/index.php?pagename=TataTertibMilis
