On Fri, 2006-05-26 at 11:21, Yanu Widodo wrote:
> On Fri, 2006-05-26 at 11:13, Wirjawan Ir. YB1LL wrote:
> > Yanu Widodo wrote:
> >
> > ># /sbin/ifconfig
> > >eth0 Link encap:Ethernet HWaddr 00:13:D4:2D:C5:3F
> > > inet addr:137.40.14.249 Bcast:137.40.14.255
> > >Mask:255.255.255.0
> > > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > > RX packets:92482 errors:0 dropped:0 overruns:0 frame:0
> > > TX packets:529 errors:0 dropped:0 overruns:0 carrier:0
> > > collisions:0 txqueuelen:100
> > > RX bytes:8198149 (7.8 Mb) TX bytes:47151 (46.0 Kb)
> > > Interrupt:10 Base address:0xd000
> > >
> > >
> > Dilihat dari ifconfig anda maka ipxnya belum jalan, dibawah ini saya
> > lampirkan ifconfig saya
> >
> > [EMAIL PROTECTED] wirjawan]# ifconfig
> > eth0 Link encap:Ethernet HWaddr 00:80:48:C7:B9:EC
> > inet addr:192.168.1.12 Bcast:192.168.1.255 Mask:255.255.255.0
> > inet6 addr: fe80::280:48ff:fec7:b9ec/64 Scope:Link
> > IPX/Ethernet 802.2 addr:00000001:008048C7B9EC
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > RX packets:756 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:5559 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:1000
> > RX bytes:88529 (86.4 KiB) TX bytes:391855 (382.6 KiB)
> > Interrupt:10 Base address:0xc400
> >
> > lo Link encap:Local Loopback
> > inet addr:127.0.0.1 Mask:255.0.0.0
> > inet6 addr: ::1/128 Scope:Host
> > UP LOOPBACK RUNNING MTU:16436 Metric:1
> > RX packets:3133 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:3133 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:0
> > RX bytes:290842 (284.0 KiB) TX bytes:290842 (284.0 KiB)
> >
> > Salam
> > Wirjawan
> >
>
> oh, begitu cara check-nya
> makasih mas wirjawan.
>
> Maaf mungkin agak ngrepotin, bersediakah mas wirjawan memberikan ulasan
> ttg bagemana cara aktifkan IPX di PC saya ?
Ok, thanks mas Wiryawan
pas saya lagi obok2 dokumentasi tentang IPX saya temukan bbrp command
# ipx_interface add -p eth0 802.2 0x39ab0222
# ipx_configure --auto_interface=on --auto_primary=on
saya jalankan lalu saya coba
dan hasilnya ...
# /sbin/ifconfig
eth0 Link encap:Ethernet HWaddr 00:13:D4:2D:C5:3F
inet addr:137.40.14.249 Bcast:137.40.14.255
Mask:255.255.255.0
IPX/Ethernet 802.2 addr:39AB0222:0013D42DC53F
IPX/Ethernet 802.3 addr:0000D512:0013D42DC53F
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:738993 errors:0 dropped:0 overruns:0 frame:0
TX packets:42469 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:103868364 (99.0 Mb) TX bytes:11671122 (11.1 Mb)
Interrupt:10 Base address:0xd000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:284972 errors:0 dropped:0 overruns:0 frame:0
TX packets:284972 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:20608012 (19.6 Mb) TX bytes:20608012 (19.6 Mb)
lalu saya coba perintah ncpmount .... diatas,
hasilnya masih sama
apa yg kurang ya ?
--
trims,
yanu
--
FAQ milis di http://wiki.linux.or.id/FAQ_milis_tanya-jawab
Unsubscribe: kirim email ke [EMAIL PROTECTED]
Arsip dan info milis selengkapnya di http://linux.or.id/milis
