Coba dalam mode grafis Linuxnya.
Saya pakai FWT Dowtel (serial port) tidak dikenali di mode text.
Setelah pakai mode grafis di Mandrakelinux 10 dial-up pakai KPPP
baru bisa connect ke internet.
----- Original Message -----
From: "Lukman HDP" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Thursday, August 03, 2006 7:18 PM
Subject: [tanya-jawab] netac usm cdma modem
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Pren,
Saya menggunakan modem netac A840 usb cdma modem dan Fedora Core 5.
Pas saya tancapkan di post usb, di dmesg ada entry:
usb 2-2: new full speed USB device using uhci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
Tapi tidak ada entry /dev/ttyUSB* ataupun /dev/ttyACM*
kemudian saya coba insert manual modulnya
# modprobe cdc-acm
di dmesg tambah entry:
usbcore: registered new driver cdc_acm
drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for
USB modems and
ISDN adapters
Tapi tetep ada belum muncul entry di /dev. Akhirnya aku tambahkan manual:
# mknod /dev/ttyACM0 c 166 0
Tapi begitu saya coba pakai wvdialconf:
[EMAIL PROTECTED] ~]# wvdialconf /etc/wvdial.conf
Scanning your serial ports for a modem.
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Port Scan<*1>: S1 S2 S3
ttyACM0<Info>: Invalid argument
Port Scan<*1>: ACM0
Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
Ada ide agar modem saya bisa dikenali??
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.4 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFE0emtkJY4+5Kvvb0RAka6AJwJbA6atOng9S5/VJdtKqIF3VB53gCdGGdw
b/got4+wXcaZzEH2mjyBffQ=
=iAzO
-----END PGP SIGNATURE-----
--
FAQ milis di http://wiki.linux.or.id/FAQ_milis_tanya-jawab
Unsubscribe: kirim email ke [EMAIL PROTECTED]
Arsip dan info milis selengkapnya di http://linux.or.id/milis
