wah... lupa ngilangin tanda # euy... hehehe... mangap...
skrg dah bisa nyetak dg command:
$ xdosemu
dir > prn
tapi masih belum dari clippernya... ntar tanya programmernya deh...
thanks anyway...
testiiiiiiiiiiiiiiiiiiiiiiinggggggggggggggggg wrote:
tanda # belum dihilangin dari conf-nya atau cuma diemail aja yg masih
ada.
$_printer = "lq2170"
$_printer_command = "lpr -l"
On Wed, 2006-12-20 at 15:56 +0700, Agi Subagio wrote:
/etc/dosemu/dosemu.conf sudah dirubah dengan konfigurasi spt ini:
## Printer settings
#
# list of (/etc/printcap) printer names to appear as LPT1, LPT2, LPT3
# (not all are needed, empty for none). Default: "lp"
# use "" if you want the printer_command (below) free-form (LPT1 only)
#
# $_printer = "lq2170"
#
# Print command to use. Default: "lpr", for "lpr -P printername".
# Sometimes (with CUPS) "lpr -l" is necessary.
#
# $_printer_command = "lpr -l"
#
# idle time in seconds before spooling out. Default: (20)
#
# $_printer_timeout = (20)
#
isi dari /etc/printcap spt ini:
linux-mbs:~ # more /etc/printcap
# This file was automatically generated by cupsd(8) from the
# /etc/cups/printers.conf file. All changes to this file
# will be lost.
lq2170|EPSON LQ-2170:rm=linux-mbs.mbs.co.id:rp=lq2170:CUPS-PDF|PDF Writer for
CUPS:rm=linux-mbs.mbs.co.id:rp=CUPS-PDF:deskjet3740|HP Deskjet
3740:rm=linux-mbs.mbs.co.id:rp=deskjet3740:DeskJet610C|Axis AXIS
5600+:rm=linux-mbs.mbs.co.id:rp=DeskJet610C:deskjet640c|HEWLETT-PACKARD DESKJET
640C:rm=linux-mbs.mbs.co.id:rp=deskjet640c:EPSON_LQ1170|EPSON
LQ-1170:rm=linux-mbs.mbs.co.id:rp=EPSON_LQ1170:
saya pake CUPS.
saya jalanin xdosemu, lalu saya panggil aplikasi clipper "contoh.exe >
lpt1", hasil di konsole ada error spt ini:
[EMAIL PROTECTED]:~/dosemu/freedos> xdosemu
ERROR: Unable to open console to evaluate the keyboard map.
Please specify your keyboard map explicitly via the $_layout option
lpr: The printer or class was not found.
lpr: The printer or class was not found.
printer tetap diam saja tuh kalau dari dosemu.
tapi kalau dari shell linux saya kasih command "ls -al | lpr -l",
printernya jalan tuh.
apa yg salah yah?
Fansul wrote:
Hello Agi,
Wednesday, December 20, 2006, 1:04:47 PM, you wrote:
arahkan setting dosemu.conf ke nama perinter anda.
$_printer = "lq2180"
$_printer_command = "lpr -l"
klu sukses perintah type namafile.exe > lpt1 harus jalan
mudah2 benar
gak keluar hasilnya sama sekali.
apakah ada yg dirubah di /etc/dosemu/dosemu.conf agar dosemu bisa baca lpt1?
--
FAQ milis di http://wiki.linux.or.id/FAQ_milis_tanya-jawab
Unsubscribe: kirim email ke [EMAIL PROTECTED]
Arsip dan info milis selengkapnya di http://linux.or.id/milis
