Hallo Semuanya....
Aku punya masalah nih. Aku punya Wifi PCI card mereknya Dlink DWL-G510
IEEE 802.11G.
Aku menggunakan Linux Slacware 11. Drivernya sudah berhasil di-install
dengan menggunakan "ndiswrapper".
Warning: Driver for device wlan0 recommend version 18 of Wireless Extension,
but has been compiled with version 16, therefore some driver features
may not be available...
wlan0 IEEE 802.11g ESSID:"default"
Mode:Auto Frequency:2.437 GHz Access Point: Not-Associated
Bit Rate:54 Mb/s Tx-Power:20 dBm Sensitivity=-121 dBm
RTS thr:2347 B Fragment thr:2346 B
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
Masalahnya adalah gimana cara koneksi ke Access Point?
Aku sudah menjalankan perintah "iwlist wlan0 scan" dan keluar message
Warning: Driver for device wlan0 recommend version 18 of Wireless Extension,
but has been compiled with version 16, therefore some driver features
may not be available...
wlan0 Scan completed :
Cell 01 - Address: 00:80:48:7E:21:94
ESSID:"CIP_OK"
Protocol:IEEE 802.11g
Mode:Managed
Frequency:2.412 GHz (Channel 1)
Quality:46/100 Signal level:-66 dBm Noise level:-96 dBm
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Extra:bcn_int=100
Extra:atim=0
Extra:wpa_ie=dd160050f20101000050f20201000050f20201000050f202
Kalau di jalankan di WindowsXP mah langsung click tombol connect dan
masukin password.
Udah deh connect.
Thanks a lot....
--
FAQ milis di http://wiki.linux.or.id/FAQ_milis_tanya-jawab
Unsubscribe: kirim email ke [EMAIL PROTECTED]
Arsip dan info milis selengkapnya di http://linux.or.id/milis
