----- Original Message ----- From: "天草次郎" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Friday, November 21, 2008 10:05 AM
Subject: Re: [tanya-jawab] 3G (zte mf522) on centos


pakai kernel versi 2.6.26 ke atas, nggak perlu usb_modeswitch lagi

On 11/20/08, Dave Muhammad <[EMAIL PROTECTED]> wrote:
tadi barusan coba pinjam modem 3G punya temen, pasang di centos. udah pake
usb_modeswitch dan buat rule '15-zte-mf620.rules' hasil gogling.

 coba lihat di:
 $dmesg
 usb 2-2: new full speed USB device using address 5
 usbserial_generic 2-2:1.0: Generic converter detected
 usb 2-2: Generic converter now attached to ttyUSB0
 usbserial_generic 2-2:1.1: Generic converter detected
 usb 2-2: Generic converter now attached to ttyUSB1
 usbserial_generic 2-2:1.2: Generic converter detected
 usb 2-2: Generic converter now attached to ttyUSB2

 coba lihat di:
 $lsusb
 Bus 005 Device 001: ID 0000:0000
 Bus 004 Device 001: ID 0000:0000
 Bus 003 Device 001: ID 0000:0000
 Bus 002 Device 005: ID 19d2:0001 # ini usb modemnya
 Bus 002 Device 001: ID 0000:0000
 Bus 001 Device 001: ID 0000:000

 coba jalanin wvdial dengan edit wvdialconf
 $wvdial
 --> WvDial: Internet dialer version 1.54.0
 --> Cannot open /dev/ttyUSB0: No such file or directory
 --> Cannot open /dev/ttyUSB0: No such file or directory
 --> Cannot open /dev/ttyUSB0: No such file or directory

 coba test wvdialconf
 $ wvdialconf /etc/wvdial.conf
 Scanning your serial ports for a modem.

 ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
 ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
 ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
 ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
 ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
 ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
 Port Scan<*1>: S2   S3   S4   S5   S6   S7


Apa masih ada step yg belum ? kok usb devicenya tidak ketemu waktu di scan
? Mohon pencerahannya.

$uname -a
Linux svrlnx2 2.6.9-42.EL ......
^ apa kernel diatas memang mesti di upgrade ? agar bisa menggunakan driver MF622

--
FAQ milis di http://wiki.linux.or.id/FAQ_milis_tanya-jawab
Unsubscribe: kirim email ke [EMAIL PROTECTED]
Arsip dan info milis selengkapnya di http://linux.or.id/milis

Kirim email ke