Hi,
I started an install of Tashi over the weekend on my machine. I have a
script of the actions and configurations I did. I will post it here as
soon as I clean out the control characters. The issues I had were as
follows:-
- The newest version of RpyC has changed its (example?)
username/password authenticator to TlsliteVdbAuthenticator from
VdbAuthenticator. Otherwise the interface is still the same, but the
protocol is probably encrypted now. The fix for Tashi is either to use
an older version of RpyC or change occurrences of VdbAuthenticator to
TlsliteVdbAuthenticator.
- Getting Linux bridging to work properly was a little bit difficult. I
think the fix here was to set forward and hello times on the bridge to 1
and keeping the physical interface joined to the bridge and up, but
without ip address. Have dhcp give an address to the bridge, which will
become the host's access to the internet.
- The location of the brctl program has moved from /usr/sbin to /sbin on
the development version of Debian I run on my machine. A small
adjustment to the qemu-ifup script here.
Greetings,
Michael.
