Dear all, Sometimes back, I think it was Roelof, who made a remark that since a few versions TB! adds One Space Character at the start of a new line. I also did notice this before. I found a post where we can nicely see this:
[1] take the last reply from Dwight (Subject: Re: LINKS in HTML Mail not properly closed / MsgID: <mid:[email protected]> [2] Hit the reply button [3] As the Original message is in HTML and Dwight replied in HTML your reply Window should show as HTML too. [4] Switch to Plain Text (MicroEd) Now you can see that all Text from the Original Post is intended by One Space Character starting from the beginning. The ">> xxx" are following only afterward. You also will notice, that The reply from Dwight has One Space Character after the ">" added. This disables the feature that all that comes after "-- " is cut off. So you will need to remove Dwight's Signature by hand. I have this since a few Versions, that I have to remove all that is below the "-- " cut mark. RITlabs should fix this finally as it literally removing TB!'s most powerful feature of QT. -- best regards | Using The Bat! 5.0.36.1 Eddie | on Windows XP 5.1 | Build 2600 Service Pack 3 ________________________________________________________ Current beta is 5.0.34.5 | 'Using TBBETA' information: http://www.silverstones.com/thebat/TBUDLInfo.html
