Hi,
since updating to v5.0.36.2 I'm getting an error message for every outgoing email: !16.03.2012, 10:36:25: SEND - The message to xxx is sent but could not be moved from Outbox to the Sent folder. The message is parked in the Outbox The message is in fact incorrect, the message has been moved successfully. I have noticed that the "send task" in Connection Center stays active for a long time before any actual communication is going on. According to the log, a connection to the server using IPv6 is tried first: 16.03.2012, 10:36:03: SEND - Connecting to SMTP xxx on port 465 16.03.2012, 10:36:24: SEND - Couldn't connect to [IPv6-address] trying subsequent addresses... 16.03.2012, 10:36:24: SEND - Connecting to [IPv4-address]... 16.03.2012, 10:36:24: SEND - Initiating TLS handshake Thus, the "sending" action takes a long time before it is completed, thus the message is still "handled", thus it can't be moved, thus the error message. How's that for a theory? What doesn't quite fit is the timestamp of the logentries. Note that the error message is timestamped at x:25 seconds, while the connection succeeds at an x:24 seconds timestamp. However, when moment the error is detected and the one it is displayed might be two different things entirely. If this reasoning proves to be accurate, the solution should be simple: Postpone the action "move from outbox to sent folder" until the action "smtp-send message from outbox" has completed. As a seperate issue, there should be a setting to "Do not use IPv6 in any case" to begin with. The fact that the machine is connected to a IPv6 router does not mean that an external IPv6 machine can be contacted, and it definitly shouldn't be taken for granted. Regards, AS
pgpHHPPdwL3UM.pgp
Description: PGP signature
________________________________________________________ Current beta is 5.0.36.3 | 'Using TBBETA' information: http://www.silverstones.com/thebat/TBUDLInfo.html
