Please try Voyager 8.2.4.3: 
http://www.ritlabs.com/download/files3/the_bat/voyager_install-8-2-4-3.exe

What's new in Voyager 8.2.4.3 since Voyager 7.4.4.1, release on January 16, 
2017, i.e. 383 days ago?

[*] Better description for the registration key validity version
[*] Better thread handling - the program works faster and generates lower 
number of the Page Faults
[*] Default print margins are now 0.25 (quarter) inch
[*] EWS option on create new account only appears when EWS DLL is present
[*] Improved speed of CRC calculation, so the program overall works slightly 
faster as a whole
[*] Increased speed of entering a folder or sorting messages in the list by 
From/To/Subject columns when there were only Latin characters. The speed 
increase is mostly noticeable in folders with more than 100 thousand messages
[*] More debug messages will be added to the ex_log.txt with 
/STARTUP_TIMING_LOG command line option. It may be helpful, for example, in 
cases to figure out why the program hangs at startup
[*] New Root CA certificates: added some root certificates used by Google mail 
servers
[*] Non-exceptional (normal) situations like IMAP server responses "NO" and 
"BAD" were added to the exceptions log
[*] On Windows 7 and later, if the fonts are configured to be displayed as 
Cleartype or if the screen resolution (pixels per inch) is 150% of base DPI or 
higher, then the new fonts are used: Consolas and Calibri instead of the old 
Courier New and Arial. Besides that, the default editor font size now 
accommodates to the screen resolution (pixels per inch): below 150% of base 
DPI, the default editor font size is 9pt as before, 150%-<200% - 10pt, 
200%-<300% - 11pt, 300% and higher - 12pt.
[*] On Windows 7 and later, with ultra-high-definition (4K) monitors with DPI 
of 192 and more (>=200% of base DPI), if an HTML email arrives with Courier New 
font defined, and the characters have font size of or between 5 and 28 points, 
the font is automatically displayed as Consolas. This behavior of substation of 
Courier New to Consolas is hardcoded and you cannot change it. This only 
affects screen, not the printer. On printer, when printing HTML with Courier 
New, this font is always used if defined so in the HTML.
[*] Welcome message (in the Inbox) is no longer used for IMAP folders
[+] If the user has Account|Properties|Verbose log turned on, then the program, 
on the "Send queued mail" command will write addition information to the log: 
on total number of messages in the outbox, and on the number that has not been 
selected for sending because of "parked" or "sending" status.
[+] Libiconv version updated to version 1.15. Added ISO-2022-JP-MS converter. 
Updated the CP1255 converter to map one more character.
[-] (#0000151) Cannot load HTML images under 32-bit (many images with the same 
URL)
[-] (#0000166) Scheduler always lost its settings
[-] (#0000335) Option "Headers | Show" in Message body is checked, even Header 
pane is disabled
[-] (#0000360) Attributes of messages in threaded message lists are not read
[-] (#0000436) Can't change language from HTML editor status bar
[-] (#0000443) Message List for normal email folder shown in "Summary View"
[-] (#0000447) Screen reader improperly reads RSS item list
[-] (#0000448) Invalid key handling in the Message Editor address grid (arrows)
[-] (#0000456) SMTP log does not auto-scroll in the Connection Center
[-] (#0000471) JAWS speaks after each character when auto-completion in the To 
field is "on"
[-] (#0000489) Accessibility Feature: Label for fields in the message creation 
window
[-] (#0000492) Message List cannot be sorted by column "Tags"
[-] (#0000493) Column "Tags" in message list cannot be size-adjusted by double 
click
[-] (#0000521) Macros do not work in HTML templates (for folder, account, etc) 
- fixed %- in html template and trailing spaces in html
[-] (#0000539) Decryption of an email with large attachment takes much time if 
internal OpenPGP implementation is used
[-] (#0000557) Copying of Sorting Office filters with hot keys is incomplete
[-] (#0000592) Email is not validated in redesigned "New Account" wizard
[-] (#0000599) Truncated/disappeared buttons in status bar of Editor window 
when switching text format to HTML mode
[-] (#0000682)  Double click on an icon of an address book contact opens the 
properties of the highlighted contact
[-] (#0000697) Screen reader does not read the names of folders in the "Manage 
IMAP folders" window
[-] (#0000699) Screen reader does not read the names of contacts in the Address 
Book
[-] (#0000718) Support for GnuPG 2.1
[-] (#0000767) Cannot load HTML images under 32-bit (many images with the same 
URL)
[-] (#0000798) Editing links in HTML-editor is faulty
[-] (#0000857) If there is not enough free space, no warning appears during the 
compacting process
[-] (#0000873) No confirmation popup for changed mail after closing window
[-] (#0000876) Modal dialog boxes with modal window frame have an icon that 
overlaps text on Windows XP computers
[-] (#0000878) Check button in property of address book for server address 
(CardDAV) not functional
[-] (#0000895) Addresses are not added into address book automatically in IMAP 
accounts
[-] (#0000896) The Program does not remember column width in the "Select Quick 
Template" window
[-] (#0000898) Tip of The Day displays national characters incorrectly. For 
example, if the "Language for non-Unicode programs" configured in Windows is 
different from Voyager interface language, the national characters were 
incorrectly displayed in the "Tip of The Day".
[-] (#0000908) MailTicker goes to background even of the "Always on top" option 
is enabled
[-] (#0000909) Umlauts in URLs are encoded wrong with Quoted-Printable in HTML 
messages
[-] (#0000932) The window "Master Password" gets hidden behind other windows
[-] (#0000946) The server-side "Sent" folder is lost and re-downloaded on each 
program start for hotmail.com accounts. Although this was not related solely 
for Hotmail. The bug was the following: if we had a local folder in the IMAP 
account with a particular name, and then we've got an IMAP folder with the same 
name from the server, Voyager couldn't handle such situations properly, it 
didn't permanently store the TBB cache file, but instead created a new TBB on 
each restart of Voyager, but the old TBB file was abandoned and no longer used, 
thus occupying the disk space in vain.
[-] (#0000964) The default fonts in the message editor (The default font 
Courier New 9 pt is small and pale)
[-] (#0001012) Print preview looks OK but the final print is not formatted 
properly - becomes excessively wide and cropped at the right (unless external 
images are loaded)
[-] (#0001038) The Sorting Office conditions are not vertically aligned 
(edit/text)
[-] (#0001039) Double-clicking a word with Cyrillic characters doesn't select it
[-] (#0001043) Screen reader does not read the text of the tabs
[-] (#0001044) Screen reader does not read the contents of the status bar
[-] (#0001045) IMAP positive test results are not displayed in the New Account 
Wizard when you click the Test Now Button
[-] (#0001059) Stopping search in the Message finder gives access violation in 
IMAP accounts
[-] (#0001081) Macro %QUOTES sets HTML message quotes to uppercase
[-] (#0001082) Image can not be pasted into HTML message by context menu
[-] (#0001085) Scrolling in address book moves selection bar instead of address 
list
[-] (#0001091) URLs with Russian characters are corrupted in Quick Templates
[-] (#0001103) Table paste not keeping columns widths
[-] (#0001113) External image download control for the system's HTML viewer 
does not work if set according to the Image Download rules
[-] (#0001118) Attachments' names in Cyrillic are converted to underscore
[-] (#0001121) <Shift> + <Ctrl> + <Arrow right> or <Shift> + <Ctrl> + <Arrow 
left> don't work as expected in HTML message preview
[-] (#0001125) Not enough room for "User / Server" localization in the 
Connection Center window
[-] (#0001138) Names of the attachments are displayed incorrectly
[-] (#0001141) Truncated text field in QR-Code Generator (German GUI)
[-] (#0001153) IMG ALT (text attribute of an HTML image) is printed with tiny 
font
[-] (#0001159) Adding Tag results in an Access Violation message
[-] (#0001160) Truncated Quick Search options
[-] (#0001162) Untranslatable Quick Search options in the Message Viewer
[-] (#0001163) Inserting smileys with ">" or "<" in the plain text editors 
inserts HTML-code instead
[-] (#0001164) Character Encoding broken if text is inserted via included text 
file
[-] (#0001166) The printed text is tiny, although the print preview is ok
[-] (#0001168) The printed font is smaller than expected (this is hardly 
noticeable at first glance, but the issue is there)
[-] (#0001170) HTML code is displayed instead of the contents of the message if 
set to the system's HTML viewer)
[-] (#0001172) Embedded images are too narrow in the internal HTML viewer
[-] (#0001173) Images in HTML templates are resized under high DPI
[-] (#0001174) Importing messages from Outlook 2016 fails to include senders' 
email addresses (removed extra space between field and value)
[-] (#0001175) The program crashes while copying tables in MS Excel
[-] (#0001177) Image files attached to messages are not printed correctly if 
image width is larger than height but paper (page) width is smaller than its 
height. If the width of an image is larger than the size of the page, then the 
right part of the image gets cut while printing/in print preview.
[-] (#0001178) Embedded images in messages bodies grow in size on each reply on 
high DPI monitors
[-] (#0001181) All letters of the quoted text are put into the uppercase while 
replying
[-] (#0001182) "List index out of bounds" while trying to assign an URL to an 
image in the HTML template
[-] (#0001183) Message List Tabs cannot be scrolled to the right on high DPI
[-] (#0001185) The program gave access violation on Exit when NVDA 
(www.nvaccess.org) was active
[-] (#0001186) Access Violation popups if inspecting message source on IMAP 
account
[-] (#0001187) The screen reader does not notice that a list of addresses 
appears in the message editor window
[-] (#0001188) The cursor jumps between From/To/CC/BCC/Subject fields using the 
arrow keys whereas only the Tab key should be applied
[-] (#0001189) The auto-complete does not offer a suggestion right away as only 
the suggestion list with no selection appears
[-] (#0001191) The option "Complete address automatically from" in the message 
editor does not work
[-] (#0001192) Image viewer does not display a PNG file although it is 
displayed in the preview tab
[-] (#0001193) The program crashes upon invoking the address book if JAWS is 
running
[-] (#0001198) The program hangs on testing outgoing connection in the Create 
New Account wizard
[-] (#0001199) Ctrl+A doesn't work in Memo in the address book properties
[-] (#0001200) The program crashes while returning to the terminal session
[-] (#0001201) Truncated options' names
[-] (#0001205) A screen reader does not speak the check-marks, selected/not 
selected in the Sorting Office
[-] (#0001206) The Up key does not return to the To, CC or BCC field in the 
message editor
[-] (#0001207) Space bar sets/removes the check-box on the selected folder and 
jumps into the search field in Watch for virtual folders
[-] (#0001208) Change of the checkboxes in the Options tab of the Sorting 
Office do not immediately affect the checkboxes in the left tree
[-] (#0001211) The first space at the beginning of the row in HTML editor is 
removed after saving the message
[-] (#0001214) The "Illegal instruction" error on viewing some JPG files under 
32-bit
[-] (#0001219) URLs are incorrectly displayed in the plain text part of messages
[-] (#0001221) Wrong display of the sender in Address History
[-] (#0001225: Quick Search tabs do not display separate message lists
[-] (#0001227) Embedded images are rendered too big
[-] (#0001228) Message Headers got multiplied everywhere - in the Preferences, 
in the Message Editor, in the viewers
[-] (#0001229) Image compression routine was called twice, which led to 
unnecessary delays when saving html message with images to Outbox
[-] (#0001231) Phantom window of the action "Add addresses to Address Book" 
appears in the preview of windows on the task bar
[-] (#0001232) Column width is not remembered in "Manage IMAP folders"
[-] (#0001234) Sorting Office does not trigger on tags
[-] (#0001235) Untranslatable string in the Connection Center
[-] (#0001238) Color combo boxes in HTML table properties switched focus to the 
main window
[-] (#0001240) Crashes on selecting HTML message if the internal HTML viewer is 
used
[-] (#0001249) A division by zero error in the MicroEd
[-] (#0001252) Wrong icons in the title bars
[-] (#0001255) CardDAV-Syncronization does not transfer Birthday (tested with 
mailbox.org)
[-] (#0001256) CardDAV-Syncronization duplicates email addresses when entry 
contains more than one email address (tested with mailbox.org)
[-] (#0001257) CardDAV Synchronization transfers Home Location Street address 
correctly, but deletes it afterwards (tested with mailbox.org)
[-] (#0001261) Cannot print multiple mails
[-] (#0001267) Sorting office column widths (in the filters tree - left part of 
the windows) are not saved
[-] (#0001268) Sorting office default column widths are not proportional to the 
text
[-] (#0001269) Tip of the day image is not rescaled to accommodate higher 
resolution
[-] (#0001272) It is not obvious that in the Address Entry, the list of 
addresses should be separated by CR, not comma
[-] (#0001273) Command line parameter "/REG" isn't supported anymore
[-] (#0001281) %CURSOR is ignored in Quick Template
[-] (#0001282) Element positions are wrong, elements are doubled up
[-] (#0001283) Improvements in check/uncheck items in tree view controls
[-] (#0001287) Logs are incorrectly scrolled in the message re-filter dialog
[-] (#0001288) Shortcut editor (when you configure shortcuts for a particular 
toolbar button) hotkey edit field is not zoomed on 4K
[-] (#0001293) Image type detection was incorrect for JPEG files
[-] (#0001296) Paste image into HTML mail from clipboard fails
[-] (#0001297) Pasting copied file in HTML mail fails with exception
[-] (#0001299) An invalid pointer operation error when dealing with mail 
messages (copy, move, process by a filter, etc.).
[-] (#0001300) An Access Violation error on exit, related to virtual folders
[-] (#0001301) "Config:1 EStringListError String list does not allow 
duplicates"-error messages in ex_log.txt during program startup
[-] (#0001309) "Insert Hyperlink" interprets command line arguments as named 
HTML characters, and thus falsified the HREF
[-] (#0001313) Opening address book entry having multiple mail addresses breaks 
stored addresses
[-] (#0001320) On 4K monitors, the mail ticker was too slow
[-] (#0001323) The log box in the "Message Base Maintenance Center" window 
doesn't scroll properly (as in the Connection Center)
[-] (#0001324) The log box in the "Account Log" window doesn't scroll properly 
(as in the Connection Center)
[-] (#0001332) Impossible to insert tables from MS Excel into HTML Quick 
Templates
[-] (#0001334) Issue with OAUTH for Mail.Ru while creating a new account
[-] (#0001335) Misleading "Authentication failed" message while creating a new 
account for Mail.Ru and Gmail and using OAUTH
[-] (#0001337) HTML Table editor is unavailable
[-] (#0001338) The buttons for "bold", "italic", drop down menu "font" and 
"fontsize" are kind of sticky
[-] (#0001341) Adding insert/overwrite mode to all message editors
[-] (#0001342) Pasting text to Quick Search was troublesome because when the 
user selects some text, e.g. an email address, in an outside application, that 
application often copies text to the clipboard with a trailing space character 
and when the user pastes it to Quick Search, the user don't see this trailing 
blank, but Voyager doesn't find the address in the message list so the user 
becomes very perplexed.
[-] (#0001343) Quick Search in Message List does not use focused tab for a 
refined search
[-] (#0001344) The spash-screen of v8 does not recognize the Home Edition
[-] (#0001346) POP3 Message Dispatcher hangs with an error
[-] (#0001347) The spash-screen does not go away if the program is 
automatically started and minized on Windows startup, or just when the program 
was started minimized and then restored
[-] (#0001348) On adding a background image, Voygager creates exceptions and a 
"List out of bounds" (or so) popup
[-] (#0001350) Quick Template is not inserted into Quick Reply
[-] (#0001355) UI elements misplaced in filter conditions
[-] (#0001358) Quick search filter doesn't clear filter on empty filter text
[-] (#0001360) No caption "paste as text" while pasting smiles in the HTML 
editor
[-] (#0001361) Multiple quotes are rendered too wide
[-] (#0001362) Empty brackets for quick templates in the drop-down menus
[-] (#0001363) It's possible to overcome the mandatory "Unique ID" handle while 
creating a colour group
[-] (#0001364) Mailsploit: Variation #1 (Compatible with multiple clients) (via 
spoof\0\n@domain) -- for new messages
[-] (#0001366) Needless confirmation on closing editor window after saving the 
message via Ctrl+S
[-] (#0001367) Access Violation on pasting smilies
[-] (#0001368) "Undo" & "Redo" work erratically
[-] (#0001369) "Paste as plain text" does not replace the highlighted text
[-] (#0001376) "Tab" in HTML editor deletes the highlighted text
[-] (#0001377) Previous created templates (text format) not usable if switching 
to HTML editor
[-] (#0001382) Issues synchronizing CardDAV. Server reports error: "HTTP/1.1 
501 Request Failed"
[-] (#0001384) Synchronization log window of Address book always showed in 
modal state
[-] (#0001386) Mailsploit: Generic test # 1
[-] (#0001387) Mailsploit: Variation # 4 (via spoof\n\0@domain)
[-] (#0001388) Mailsploit: Variation # 3.2 (via "spoof" <test>\n\0\0\0 
<user@domain>)
[-] (#0001389) Mailsploit: Variation # 2.2 (via test" <spoof>\0\n <user@domain>)
[-] (#0001390) Mailsploit: Variation # 2.1 (via spoof\0\n <user@domain>)
[-] (#0001391) Mailsploit: Generic test # 2
[-] (#0001392) Mailsploit: Variation # 6 (via spoof(spoof@domain)
[-] (#0001393) Mailsploit: Variation # 3 (via "spoof" <spoof>\n\0\0\0 
<user@domain>)
[-] (#0001394) Mailsploit: Variation # 3.1 (via "test" <spoof>\n\0\0\0 
<user@domain>)
[-] (#0001395) Mailsploit: Mozilla-Thunderbird 52.5.0-like (via spoof\n\0 
<spoof\n\0@domain>)
[-] (#0001396) Mailsploit: Variation # 2 (via spoof" <spoof>\0\n <user@domain>)
[-] (#0001397) Mailsploit: macOS  10.13.1 / iOS 11.2 Mail.app / Open-Xchange < 
7.10.0 / CloudMagic Newton 9.8.79-like (via spoof\0(spoof)@
[-] (#0001398) Mailsploit: Variation # 5 (via spoof <user@domain>)
[-] (#0001407) The Message Dispatcher does not remember the position of the 
header auto-view splitter
[-] (#0001412) Special characters (Unicode with code of more than 65535) are 
improperly displayed in HTML editor
[-] (#0001416) Switching between smiles and plain text editor does not affect 
immediately
[-] 64-bit Simple MAPI handler DLL gave access violation errors
[-] Captions of some character set names weren't translated
[-] Fix of the previously unfixed bug
[-] Fixed a "stack overflow" error which could occur when a message got loaded, 
e.g. on IMAP
[-] Fixed a bug that might cause "Access Violation" error in filters when there 
were multiple connections already working with the filters, for example, when 
moving sent message from Outbox to Sent folder
[-] Fixed a EStringListError "List index out of bounds (0)" error in the image 
download manager
[-] Fixed an "Abstract error" - this message was given when opeining EML files 
on disk
[-] Fixed an access violation at startup
[-] Fixed an access violation error on exit that could prevent from saving 
toolbar configuration data
[-] fixed an access violation related to IMAP which could happen in many cases, 
e.g. after sening out a messag, etc - this was happening for a logn time
[-] Fixed an access violation that might happen at the beginning of an IMAP 
session when it the account was configured to use multiple IMAP connections.
[-] Fixed an access-violation on exit when the messages were loading via IMAP 
in progress and the user exits Voyager at this moment
[-] Fixed an error that could happen when there were no free space left on disk
[-] Fixed an error when cancelling a folder compression task on exit
[-] If a QR Code window was called from the main window and was open, and you 
close the program, there was an Access Violation error
[-] If the user interface was in such a language to which the website 
www.ritlabs.com was not translated and the user pressed "Help" button of F1 
key, and there were no CHM file of this langugage present, the program gave an 
obscure error "Missing context help indxed ...". Now it opens the online help 
in English.
[-] If there were a message source view window open and you closed the program, 
there were an access violation error.
[-] If you collapse an account in the folder tree and restart the program, this 
account again becomes open, if you click the folder tabs before
[-] If you save generated QR code to file or copy it to clipboard, it didn't 
scale to the fixed number of times, which might result uneven scaling.
[-] Improvements on multi-threaded operation
[-] Long labels didn't wrap in progress dialogues
[-] MaliSendMailW gave access violation errors
[-] Margin size adjustment controls (blue) didn't show in the print preview if 
the window was opened maximized 
[-] Removed some hard-coded fonts from some dialogs
[-] SmartPad gave access violation
[-] Some normal connection state changes were written to the ex_log.txt file
[-] The "processing folders" status display window had too narrow captions
[-] The default string encoding in anti-spam plugin changed from 
Windows-default-for-non-Unicode-programs to UTF-8
[-] The MailTicker was sometimes grey and didn't move
[-] The message editor status bar didn't show cursor position (line/character) 
for the following modes: Plaintext (Windows), HTML+Plaintext, HTML only. It did 
only show cursor position for Plaintext (Microed). Now it shows the position 
for all the editor types.
[-] The program became slightly faster as a whole beause of significant 
improvements to some internal algorithms
[-] The program couldn't gracefully handle improperly specified 
"charset=unicode", especially in malformed HTML messages
[-] The program didn't always set the FILE_ATTRIBUTE_TEMPORARY for temporary 
files
[-] The QR Code generator didn't save a generated code to file properly. It 
asked for a list of graphic formats, but in fact only supported BMP. So if you 
chose, for example, PNG, it saved a BMP into the file with .PNG extension which 
was incorrect. Now it only offers to save to PNG.
[-] There were an error after closing a separate window that shows an HTML 
message and opening it again and clicking to load external images while using 
own internal HTML viewer
[-] When a QR Code window was already open and then the user have put another 
window to front and chose to generate a QR code from the menu, the old QR Code 
window remained in the background so the user had no idea what happened, as if 
nothing happened. Now the QR Code window will be brought to front in such cases.
[-] When the program saves images, for example when you edit and HTML message 
where you have inserted inline images from clipboard, or you have added a photo 
to an address book entry - the program chooses between the two file formats - 
PNG and JPG, compressing to both formats and seeing which of the files are 
smaller. For PNG, compression level from 1 to 9 is selected, based on the 
dimensions of the image: larger images take faster compression levels, to not 
produce interface freezes when saving message; for JPG, quality of 85 is always 
choosen. Previously, the program did always save in JPG with 100 level, which 
did produce very big files. For photos, JPG proces smaller files than PNG, 
while PNG makes smaller files when there are flat images with just a few 
colors, like a simple screenshot.
[-] When the Sorting Office window was opened, but the main window was in 
foreground, the Sorting Office window was trying to check the clipboard data 
used by other programs, which gave errors under Windows 10.


________________________________________________________
 Current beta is 8.2.4.2 | 'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html

Reply via email to