Hello Nick, I got the following from Nick Danger some time ago. ========================================================= - There is a tokenact.dat file in the MAIL subfolder, that is specific for the drive Voyager is installed on. Make a copy of it with tokenact_usb.dat name in the same dir (copy somewhere else first, rename it, move back).
- Copy the Voyager dir from your USB drive to the PC. - Start Voyager and activate it again. - Now make a copy of the current tokenact.dat file in the MAIL subfolder with tokenact_PC.dat name in the same dir (copy somewhere else first, rename it, move back). - At this point you have tokenact.dat, tokenact_usb.dat, tokenact_PC.dat in the MAIL subfolder. Use Voyager. If you travel, just copy the whole Voyager onto the USB stick, delete the tokenact.dat file, copy the tokenact_usb.dat as tokenact.dat into the MAIL and you are ready to use it. After the travel, just copy the whole Voyager from the USB stick onto the PC, delete the tokenact.dat file, copy the tokenact_PC.dat as tokenact.dat into the MAIL and you are ready to use it. I think, you get the idea. I do this, except that I shuttle the same Voyager between my 14" laptop (used at home), my 7" laptop (longer travel) and the USB stick (short travel) :) ===================================================== Hope this helps, Regards Hamish Saturday, March 28, 2009, 5:13:11 PM, you wrote: ND> Hello List, ND> Here's one of those things that I recall reading about, thought "Gee, ND> that sound useful", but at the time I didn't have any need for it and ND> the info has since slid out of my head. ND> Someone here told of a method to use for Voyager where you could just ND> copy the entire folder from a USB drive to your hard drive as needed. ND> I seem to remember that it involved mostly one particular file that ND> you need to name/rename depending on which drive it was that you were ND> currently transferring the data to. ND> Does this ring a bell with anyone? Hamish Email:[email protected] ________________________________________________________ Current beta is 4.1.11.8 | 'Using TBBETA' information: http://www.silverstones.com/thebat/TBUDLInfo.html
