Here it is.
menuentry "GNU/Linux Test Tboot, linux 2.6.38.8_test-x64_1.0" {
set root='(hd0,1)'
multiboot /boot/tboot.gz /boot/tboot.gz logging=vga,memory,serial
vga_delay=5
module /boot/vmlinuz-2.6.38.8_test-x64_1.0
/boot/vmlinuz-2.6.38.8_test-x64_1.0 root=/dev/sda1 ro console=tty0
console=ttyS0,115200 intel_iommu=on
module /boot/Xeon-5600-3500-SINIT-v1.1.bin
}
The machine has 16GB ram, could that be a problem for tboot?
Best wishes,
--
Ning Qu
On Tue, Feb 28, 2012 at 4:29 PM, Cihula, Joseph <joseph.cih...@intel.com>wrote:
> OK, I see the lines now.****
>
> ** **
>
> I think the following may be the problem:****
>
> TBOOT: no e820 map, mem_lower=27a, mem_upper=33d5e4****
>
> ** **
>
> Can you send your grub.conf file?****
>
> ** **
>
> Joe****
>
> ** **
>
> *From:* Ning Qu [mailto:qun...@gmail.com]
> *Sent:* Tuesday, February 28, 2012 4:18 PM
> *To:* Cihula, Joseph
> *Cc:* Wei, Gang; tboot-devel@lists.sourceforge.net
>
> *Subject:* Re: [tboot-devel] any version combination worked for xeon 5620?
> ****
>
> ** **
>
> Yes, kernel works fine without tboot, but hangs up there when tboot loads
> the kernel, even if TPM is usable ...****
>
> ** **
>
> With tboot, the previous email has all the logs, you can tell it's from
> kernel when there is no tboot prefix in the line.****
>
> ** **
>
> For non-tboot boot, do you need the full log?****
>
>
> Best wishes,
> --
> Ning Qu
>
> ****
>
> On Tue, Feb 28, 2012 at 4:10 PM, Cihula, Joseph <joseph.cih...@intel.com>
> wrote:****
>
> Can you also capture the output from the Linux kernel (on both a tboot and
> non-toot boot)? (I presume the kernel works fine if you don’t use tboot?)
> ****
>
> ****
>
> Joe****
>
> ****
>
> *From:* Ning Qu [mailto:qun...@gmail.com]
> *Sent:* Tuesday, February 28, 2012 3:44 PM
> *To:* Wei, Gang
> *Cc:* tboot-devel@lists.sourceforge.net
> *Subject:* Re: [tboot-devel] any version combination worked for xeon 5620?
> ****
>
> ****
>
> Sorry about the delay, got caught up by something else. The information is
> inline below. Thanks for any inputs!****
>
>
> Best wishes,
> --
> Ning Qu****
>
> On Sun, Feb 26, 2012 at 12:11 PM, Wei, Gang <gang....@intel.com> wrote:***
> *
>
> Before I can help, I need to know:****
>
> 1. Which tboot version are you using? Upstream changeset
> 299/v1.7.0, rpms released with distro, or some else?****
>
> tboot-1.7.0.tar.gz from tboot official website, built from source code.**
> **
>
> 2. Are you using grub or grub2?****
>
> grub2 ****
>
> 3. Have you configure the kernel with TXT options enabled before
> build it?****
>
> Yes, with TXT enabled.****
>
> ****
>
> 4. Can you attach the whole serial log while you come back again?**
> **
>
> Here is the output when TPM is disabled in BIOS:****
>
> ****
>
> TBOOT: ******************* TBOOT ***********************
>
> TBOOT: 2012-01-15 23:30 +0800 1.7.0****
>
> TBOOT: *************************************************
>
> TBOOT: command line: /boot/tboot.gz logging=vga,memory,serial vga_delay=5*
> ***
>
> TBOOT: BSP is cpu 32****
>
> TBOOT: no e820 map, mem_lower=27a, mem_upper=33d5e4****
>
> TBOOT: TPM is disabled.****
>
> TBOOT: TPM: write nv 20000002, offset 00000000, 00000004 bytes, return =
> 00000002****
>
> TBOOT: Error: write TPM error: 0x2.****
>
> TBOOT: TPM not ready.****
>
> TBOOT: no LCP module found****
>
> TBOOT: Error: ELF magic number is not matched.****
>
> TBOOT: assuming kernel is Linux format****
>
> TBOOT: Initrd from 0x7fc25000 to 0x7ffff4a0****
>
> TBOOT: Kernel (protected mode) from 0x1000000 to 0x13d68a0****
>
> TBOOT: Kernel (real mode) from 0x90000 to 0x93c00****
>
> TBOOT: transfering control to kernel @0x1000000...****
>
> ****
>
> Here is the log when TPM is enabled.****
>
> ****
>
> TBOOT: ******************* TBOOT ***********************
>
> TBOOT: 2012-01-15 23:30 +0800 1.7.0****
>
> TBOOT: *************************************************
>
> TBOOT: command line: /boot/tboot.gz logging=vga,memory,serial vga_delay=5*
> ***
>
> TBOOT: BSP is cpu 32****
>
> TBOOT: no e820 map, mem_lower=27a, mem_upper=33d5e4****
>
> TBOOT: TPM is ready****
>
> TBOOT: TPM nv_locked: TRUE****
>
> TBOOT: TPM timeout values: A: 750, B: 750, C: 750, D: 750****
>
> TBOOT: Wrong timeout B, fallback to 2000****
>
> TBOOT: reading Verified Launch Policy from TPM NV...****
>
> TBOOT: TPM: get capability, return value = 00000002****
>
> TBOOT: TPM: fail to get public data of 0x20000001 in TPM NV****
>
> TBOOT: :reading failed****
>
> TBOOT: reading Launch Control Policy from TPM NV...****
>
> TBOOT: TPM: get capability, return value = 00000002****
>
> TBOOT: TPM: fail to get public data of 0x40000001 in TPM NV****
>
> TBOOT: :reading failed****
>
> TBOOT: failed to read policy from TPM NV, using default****
>
> TBOOT: policy:****
>
> TBOOT: version: 2****
>
> TBOOT: policy_type: TB_POLTYPE_CONT_NON_FATAL****
>
> TBOOT: hash_alg: TB_HALG_SHA1****
>
> TBOOT: policy_control: 00000001 (EXTEND_PCR17)****
>
> TBOOT: num_entries: 2****
>
> TBOOT: policy entry[0]:****
>
> TBOOT: mod_num: 0****
>
> TBOOT: pcr: none****
>
> TBOOT: hash_type: TB_HTYPE_ANY****
>
> TBOOT: num_hashes: 0****
>
> TBOOT: policy entry[1]:****
>
> TBOOT: mod_num: any****
>
> TBOOT: pcr: 19****
>
> TBOOT: hash_type: TB_HTYPE_ANY****
>
> TBOOT: num_hashes: 0****
>
> TBOOT: TPM: write nv 20000002, offset 00000000, 00000004 bytes, return =
> 00000002****
>
> TBOOT: Error: write TPM error: 0x2.****
>
> TBOOT: no policy in TPM NV.****
>
> TBOOT: IA32_FEATURE_CONTROL_MSR: 00000005****
>
> TBOOT: CPU is SMX-capable****
>
> TBOOT: ERR: SENTER disabled by feature control MSR (5)****
>
> TBOOT: SMX not supported.****
>
> TBOOT: no LCP module found****
>
> TBOOT: Error: ELF magic number is not matched.****
>
> TBOOT: assuming kernel is Linux format****
>
> TBOOT: Initrd from 0x7fc25000 to 0x7ffff4a0****
>
> TBOOT: Kernel (protected mode) from 0x1000000 to 0x13d68a0****
>
> TBOOT: Kernel (real mode) from 0x90000 to 0x93c00****
>
> TBOOT: transfering control to kernel @0x1000000...****
>
> ****
>
> Decompressing Linux... Parsing ELF... done.****
>
> Booting the kernel.****
>
> ****
>
> Then just hangs up there forever ..****
>
> ****
>
> ****
>
> ****
>
> Jimmy****
>
> ****
>
> *From:* Ning Qu [mailto:qun...@gmail.com]
> *Sent:* Saturday, February 25, 2012 2:48 AM
> *To:* tboot-devel@lists.sourceforge.net
> *Subject:* [tboot-devel] any version combination worked for xeon 5620?****
>
> ****
>
> I have tried tboot with both kernel 2.6.35.13 and 2.6.38.8, none of them
> work for me.****
>
> ****
>
> My machine is with Xeon 5620, and without TXT enabled. I was hoping this
> will be easier since tboot will just switch back to regular mode and load
> kernel and boot up with it.****
>
> ****
>
> However, I even can't get that working. The kernel hangs up there after
> uncompressing itslef ...****
>
> ****
>
> Any idea about this? Or any suggestion with a combination of tboot and
> kernel that works for your case? Thanks!****
>
> ****
>
> ****
>
> ** **
>
------------------------------------------------------------------------------
Virtualization & Cloud Management Using Capacity Planning
Cloud computing makes use of virtualization - but cloud computing
also focuses on allowing computing to be delivered as a service.
http://www.accelacomm.com/jaw/sfnl/114/51521223/
_______________________________________________
tboot-devel mailing list
tboot-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/tboot-devel
