-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On Thu, 14 Jun 2001 18:49:54 +0200, Urke contributed this to our
collective wisdom:
...
U> I get Mercury/32, but, I cannot to make it work. How to do that, and
U> what to put in TB for SMTP?
For SMTP to work, you need Mercury S and Mercury E running.
For Mercury S, go into its configuration settings and in the
'relay/connection' control section, hit the 'add restriction' button and
enter 127.0.0.1 as the IP address and enable 'allow connections from this
address group'. Otherwise, from there on, you can use the default
settings. MercuryE requires no specific configuration.
If you're having problems with sending messages directly to the recipient
domain servers, you can use Mercury C instead of Mercury E. In Mercury C,
use one of your many SMTP servers as a SmartHost and the messages will be
relayed via the SMTP server without problems.
For TB!, you can either put 'localhost' or '127.0.0.1' as the SMTP server
to use.
Good Luck!
- --
A. Curtis Martin �� List Moderator (and fellow registered end-user)
Using The Bat! (v1.53bis) [OS: Windows 2000 (Service Pack 2)]
-
'There is no dark side of the moon. Really.'
__
-----BEGIN PGP SIGNATURE-----
Version: PGP 6.5.8ckt (Build/06)
Comment: Public Key available at http://key.ac-martin.com
iQA/AwUBOyl53FfJ62ArBxfiEQJI0wCg0XqRxRW5fsZTQN5FK4GfPOpIItgAoPn+
RUdoirodGGK3SsqUPearUPc9
=YjQd
-----END PGP SIGNATURE-----
--
______________________________________________________
Archives : <http://tbtech.thebat.dutaint.com>
Moderators : <mailto:[EMAIL PROTECTED]>
Unsubscribe: <mailto:[EMAIL PROTECTED]>
