Hello Syafril Hermansyah,
On Sun, 2 Jan 2000 01:09:32 +0700 GMT your local time,
which was Sunday, January 02, 2000, 1:09:32 AM (GMT+0700) my local time,
Syafril Hermansyah wrote:
Syafril> This month my server will change the connection, from 10BaseT HUB
Syafril> connection to 100BaseT Switch, also I 'll upgrade the HDD and RAM (now
Syafril> using IDE 4 GB and 128 MB RAM) to SCSI and 256 MB RAM, I hope the
Syafril> performance will increase.
I would recommend first adding the ram and then seeing what happens.
You need 2 drives anyway and if you want more speed, you could be
better off buying some UDMA 66 drives and a new board then buying the
scsi drives of high speed. Latest AOPEN can do almost any chips (with
risercards) and runs about S$150.
A friend just got one and while the setting up took him a bit of time,
it now runs a coppermine 500 at 700, UDMA drives run about
16mb/sec.... Board will also run a celeron /P2 so its a nice way to
upgrade and MUCH cheaper then high speed scsi!
Donot forget you need at least 2 drives anyway....
KR>> Still 1999 for nearly 7 hours here....
Syafril> I think you're pass the Y2K now :-)
yes, friend had compaq 496, dos doesnt like 2000 but windows happily
tells him it is...
Best regards,
tracer
Using theBAT 1.38e
mail to : [EMAIL PROTECTED]
--
--------------------------------------------------------------
View the TBUDL archive at http://tbudl.thebat.dutaint.com
To send a message to the list moderation team double click here:
<mailto:[EMAIL PROTECTED]>
To Unsubscribe from TBUDL, double click here and send the message:
<mailto:[EMAIL PROTECTED]>
--------------------------------------------------------------
