Earlier, I wrote...
>To the best of my knowledge, I have Bat 1.41 set up properly in
>Server mode on Machine1 and Bat 1.39 set up properly in
>Client mode on Machine2.
Well, I managed to get the Client to cause the Server to dial out. My
two-part problem was that I needed to have my DUN applet set to auto-dial
(which it wasn't) and/or wait for up to 30 seconds before the Server
actually dialed after receiving the request from the Client (I had thought
such an action would have been instantaneous).
I'll have to re-examine my fiddling because now, when I start the Client,
the ethernet gets a half-dozen or so collisions.
My next question follows in a separate message.
Brian Smither
[EMAIL PROTECTED]
--
--------------------------------------------------------------
View the TBUDL archive at http://tbudl.thebat.dutaint.com
To send a message to the list moderation team double click here:
<mailto:[EMAIL PROTECTED]>
To Unsubscribe from TBUDL, double click here and send the message:
<mailto:[EMAIL PROTECTED]>
--------------------------------------------------------------
You are subscribed as : [email protected]
