On Tue, 6 Dec 2005 11:17:41 +0200, Edvinas MatiuĊĦaitis wrote: > Well, it is not the case here. I was doing everything absolutely the same as > you describing, however BayesIt creates just the following directories and > files (output of dir *.* /s): > > ======================================= > Directory of Q:\Mail\BayesIt > > 2005-12-06 11:10 <DIR> . > 2005-12-06 11:10 <DIR> .. > 2005-12-06 11:04 <DIR> base > 2005-12-06 11:06 2 587 bayesit.LOG > 1 File(s) 2 587 bytes > Directory of Q:\Mail\BayesIt\base > 2005-12-06 11:04 <DIR> . > 2005-12-06 11:04 <DIR> .. > 2005-12-06 11:06 <DIR> transact > 0 File(s) 0 bytes
Well, I've been down this road also, so you're not alone Edvinas. I seem to recall that the problem occurs when the mail folder is not in the 'default' location, i.e. as part of the TB program folder group. IIRC I *think* I got over the problem by creating two 'dummy' files using notepad and manually copying them to the 'new' Bayesit location. Once BayesIt managed to write some extra entries to this location then everything worked OK afterwards. Make doubly sure that the folder locations are EXACTLY where they should be in the Bayeit options. And, make sure that you haven't got TWO copies of BayesIt installed in different locations. I had these problems a few versions ago and up to now subsequent program 'upgrades' have worked OK. Good Luck! -- Best regards Barry barryh'at'kentra'dot'co'dot'uk Using TheBat! version 3.62.14 and BayesIt! 0.8.4 Release ________________________________________________ Current version is 3.62.14 | 'Using TBUDL' information: http://www.silverstones.com/thebat/TBUDLInfo.html
