Hi,
I would like to hear from you for suggestions on how libpcap can be
updated to libdlpi. I have a couple of possible approaches to make
this addition but they may not necessarily be the best approach:
1) Introduce a new pcap-libdlpi-solaris.c file which will handle all the
versions of Solaris with libdlpi. The existing pcap-dlpi.c will continue
working for pre-libdlpi versions of Solaris.
2) Continue with the use of ifdef #HAVE_SOLARIS approach in the existing
pcap-dlpi.c file to call libdlpi functions for releases that support
libdlpi.
3) Instead of using libdlpi, add support to open different
directories, i.e /dev/net, /dev/ipnet, and add other Solaris-specific
ioctls to the existing pcap-dlpi.c file under #ifdef protection.
I have developed a prototype with the option 1 proposed. I would like to
hear from you if you have any comments or feedback.
The changes made to the libpcap library can be seen at the link below:
http://cr.opensolaris.org/~sagun/libpcap/
I will be adding a readme file with these changes when providing the
patch later. I've compiled and ran this version of libpcap with tcpdump
and wireshark on a system with and without clearview-UV.
As mentioned before once the UV component of Project Clearview
(http://opensolaris.org/os/project/clearview/uv/) integrates into
Solaris, libpcap will allow you to capture packets at non IP-layers as
well. The present libpcap library enumerates available network devices
on Solaris with find_alldevs() using SIOCCLGIFCONF flag. Therefore,
only network devices which have been plumbed by IP are listed. In this
version of libpcap, find_alldevs() calls pcap_platform_finddevs() to
find the rest unplumbed network devices. Since pcap_platform_finddevs()
is implemented using of dlpi_walk(), which will be provided with libdlpi
when UV integrates, the latest version of SXDE/SXCE will not be able to
support this feature.
Thank you for reviewing,
Sagun
-
This is the tcpdump-workers list.
Visit https://cod.sandelman.ca/ to unsubscribe.
