On Jan 19, 2016, at 5:50 PM, Guy Harris <g...@alum.mit.edu> wrote:
> OK, so the new format is that the frame begins with a measurement header,
> which is followed by the bitstream from the bus?
>
> Is the bitstream from the bus padded in that fashion?
>
> From the Wikipedia article on FlexRay (the first of the ISO standards the
> article mentions costs CHF 118, so I'm not going to buy them immediately):
>
> https://en.wikipedia.org/wiki/FlexRay
>
> a frame consists of some framing bits at each end of the frame, with each
> octet in the frame containing 2 bits of per-byte framing followed by the 8
> bits of the octet. Would LINKTYPE_FLEXRAY/DLT_FLEXRAY frames include all of
> those bits? If so, where does the padding appear?
(I'm assuming here that one packet in a pcap or pcapng file with type
LINKTYPE_FLEXRAY corresponds to a FlexRay frame, of the sort described at
http://www.ni.com/white-paper/3352/en/#toc4
under "Frame Format".)
_______________________________________________
tcpdump-workers mailing list
tcpdump-workers@lists.tcpdump.org
https://lists.sandelman.ca/mailman/listinfo/tcpdump-workers
