On Nov 26, 2018, at 6:03 AM, Dave Barach (dbarach) <dbar...@cisco.com> wrote:
> I've built a wireshark dissector for fd.io vpp graph dispatcher pcap traces. > Please see https://fdio-vpp.readthedocs.io/en/latest/ for a description of > the code base / project, etc. > > For development purposes, I borrowed one of the USERxxx encap types. Please > allocate a LINKTYPE_/DLT_ type for this file format, so I can upstream the > dissector. > > Thanks... Dave Barach > Fd.io vpp PTL > > Trace Record format > ------------------- > > VPP graph dispatch trace record description, in network byte order. Integers > wider than 8 bits are in little endian byte order. "Byte order" doesn't apply to 8-bit fields; if all fields are in little-endian byte order, what, if anything, is in network byte order (big-endian)? And is everything guaranteed to be in little-endian byte order *even if the tracing code is running on, for example, a Power ISA processor running in big-endian mode, or on z/Architecture processor (which *only* runs big-endian)? > 0 1 2 3 > 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 > +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ > |Major Version |Minor Version |Buffer index high 16 bits | > +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ > |Buffer index low 16 bits |Node Name Len | Node name ... | > +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ > + Node name cont'd... ... | NULL octet | > +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ > | Primary buffer metadata (64 octets) | > +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ > | [Secondary buffer metadata (64 octets, major version > 1)] | > +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ > | ASCII trace length 16 bits | ASCII trace ... | > +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ > | ASCII trace cont'd ... ... | NULL octet | > +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ > | Packet data (up to 16K) | > +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Is there a page at any fd.io or VPP Web site that describes the header, to which we could point? > Notes: as of this writing, major version = 1, minor version = 0. Presumably any code that can read major version M, minor version N will also be able to read major version M, minor version K, for all values of K <= N. > See below for pro forma definitions of the primary buffer metadata and > primary opaque data. Please refer to fd.io vpp source code before you invest, > send money, or write code: "git clone https://gerrit.fd.io/r/vpp"; > > Trace records are generated by code in > .../src/vlib/main.c:dispatch_pcap_trace(...). > > The secondary buffer metadata shown in the diagram above is NOT present in > version 1 traces. So if some future version 2 of the trace is defined, an update will be sent to tcpdump-workers, describing the secondary buffer metadata? For the fields defined in that header: What is the buffer index? Does the node name length include the terminating NUL? (Presumably anything writing those files MUST, in the RFC 2119 sense, null-terminate strings, and anything writing those files MUST not assume that the strings are null-terminated; a count *and* a terminating NUL is redundant.) Does the ASCII trace length include the terminating NUL? Is that just an opaque string to display to the user, or are there any ways in which an application can parse it? In an earlier mail on another list you said: > Packet data can be anything: L2, L3, L4 or above. The vpp dissector knows > from the node name what to expect. I have a [seriously incomplete as of this > writing] table of the form: > > #define foreach_node_to_dissector_handle \ > _("ip6-lookup", "ipv6", ip6_dissector_handle) \ > _("ip4-input-no-checksum", "ip", ip4_dissector_handle) \ > _("ip4-lookup", "ip", ip4_dissector_handle) \ > _("ip4-local", "ip", ip4_dissector_handle) \ > _("ip4-udp-lookup", "ip", udp_dissector_handle) \ > _("ip4-icmp-error", "ip", ip4_dissector_handle) \ > _("ip4-glean", "ip", ip4_dissector_handle) \ > _("ethernet-input", "eth_maybefcs", eth_dissector_handle) Presumably, once a node name is used for a particular type of payload, it will always indicate that particular payload type. Could new node names be added in the future? Is there a page at any fd.io or VPP Web site that gives the current list of node names, showing what payload type each node name indicates? > Pro forma structure definitions: So which of those structures describes the primary metadata? _______________________________________________ tcpdump-workers mailing list tcpdump-workers@lists.tcpdump.org https://lists.sandelman.ca/mailman/listinfo/tcpdump-workers
