--- Begin Message ---

I haven’t heard any response, perhaps because I was not subscribed the the 
mailing list? Apologies is this a repeat.

We are working on a new encasulation for ITU G.9959 frames. The plan is for it 
to be modelled after the LINKTYPE_IEEE802_15_4_TAP in the IEEE 802.15.4 TAP 
Link Type Specification 
 . However because of the signifigant differences between IEEE 802.15.4 and ITU 
G.9959 we will be publishing a new ITU G.9959 TAP specification. The TAP 
Specification will contain TLV values for ITU G.9959 specific meta-data such as 
region, mode, channel, RSSI, etc. and the payload will be actual ITU G.9959 
frames themselves.

We suggest a Linktype name of LINKTYPE_ITU_G9959_TAP and Description 

ITU-T G.9959 Short range narrow-band digital radiocommunication with a 
pseudo-header containing TLVs with metadata preceding the G.9959 header.

The ITU Recommendation G.9959 document can be found here 
https://www.itu.int/rec/T-REC-G.9959 <https://www.itu.int/rec/T-REC-G.9959>. 
Work is ongoing on a wireshark dissector (hence the request for DLT LINKTYPE) 
and the TAP encapulation is still in development and will be published shortly. 

Thank-you and please let me know if any additional information is required.

+ Chris Brandson

Exegin Technologies
401 - 2071 Kingsway Avenue
Port Coquitlam BC V3C 6N2

This communication (and any information or material transmitted with this 
communication) is confidential, may be privileged and is intended only for the 
use of the intended recipient. If you are not the intended recipient, any 
review, retransmission, conversion to hard copy, copying, circulation, 
publication, dissemination, distribution, reproduction or other use of this 
communication, information or material is strictly prohibited and may be 
illegal. If you received this communication in error, please notify us 
immediately by telephone or by return email, and delete this communication, 
information and material from any computer, disk drive, diskette or other 
storage device or media. Thank you. 

--- End Message ---
tcpdump-workers mailing list

Reply via email to