Hi All,
I am using tcpreplay- version 3.4.4.
The usage is like Client - Server packets go in one interface(eth0), Server -
Client traffic goes in another interface(eth2).
DUT is another PC having two interfaces. Packets sent using tcpreplay are
received in the DUT (wireshark displays all the packets), but my application
running in the DUT does not receive or see any packets.
Why is this behavior ??.
What I should do, so that my application under test can see the packets ??
Any help is appreciated.
Regards,
S. Senthil kumar
________________________________
SASKEN BUSINESS DISCLAIMER: This message may contain confidential, proprietary
or legally privileged information. In case you are not the original intended
Recipient of the message, you must not, directly or indirectly, use, disclose,
distribute, print, or copy any part of this message and you are requested to
delete it and inform the sender. Any views expressed in this message are those
of the individual sender unless otherwise stated. Nothing contained in this
message shall be construed as an offer or acceptance of any offer by Sasken
Communication Technologies Limited ("Sasken") unless sent with that express
intent and with due authority of Sasken. Sasken has taken enough precautions to
prevent the spread of viruses. However the company accepts no liability for any
damage caused by any virus transmitted by this email.
Read Disclaimer at http://www.sasken.com/extras/mail_disclaimer.html
------------------------------------------------------------------------------
Better than sec? Nothing is better than sec when it comes to
monitoring Big Data applications. Try Boundary one-second
resolution app monitoring today. Free.
http://p.sf.net/sfu/Boundary-dev2dev
_______________________________________________
Tcpreplay-users mailing list
Tcpreplay-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/tcpreplay-users
Support Information: http://tcpreplay.synfin.net/trac/wiki/Support
