Hey there... I am trying to get the WLANS configured and operational prior to my leaving. We are running WSC here using Cisco 1141 and 1142 AP's.
I am going to use one WLAN as an example. If I can get this one working then I know what to do on the others. WISM: 1. I have the interface for the NE_WLAN set to VLAN 96, 10.10.96.1/24 gateway 10.10.96.4/24 2. I have the WLAN set to use interface NE [WPA+WPS2][auth (PSK)] 6513 Core 1. int vlan 96 10.10.96.4/24 NE - main switch 1. vlan 96 but no interface set. DHCP server at the high school set with I am trunking VLAN 96 across all interfaces that come to this particular building. Any wireless devices within that building pull the correct IP info from DHCP. Here is the trouble that I am having with this setup. If you are on a wireless device within that building you can get to the servers at the high school, have internet and email access. But you cannot connect to a wireless projector in the building on the same VLAN! You can get to projectors at the high school from that building and, from the high school you can connect to the wireless projector in that building.... I thought that it might be that the gateway was not in the building so I put the 96.4 address on the local 3560 switch and changed the IP on the core switch to a 96.3. With it set this way I cannot ping the .4 address from the high school and cannot ping the .3 address from the switch... Any guidance? Thanks. Scott O
_______________________________________________ Tech-geeks mailing list Tech-geeks@tech-geeks.org http://lists.illinicloud.org/cgi-bin/mailman/listinfo/tech-geeks
