Yeah, I found that article, too. And that's pretty much the way we have it set up, except I'm monitoring outbound only. The problem is that things that should be getting blocked are not. I think it has something to do with the ingress vlan that was set up on the previous switch, but I'm not positive that's the case.
Darin Hostetter Technology Coordinator Marshall School District -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Aaron Hackney Sent: Friday, July 23, 2010 10:06 AM To: Tech-Geeks Mailing List Subject: Re: [tech-geeks] 3Com Port Mirroring Darin, here is how it is done on a 3Com 4500. Hope that's close enough. When you are searching, use the word SPAN and I think you'll find something more exact. http://www.gutizz.com/set-3com-superstack-3-switch-4500-port-mirroring-span/ HTH -A On Thu, Jul 22, 2010 at 7:11 PM, Darin Hostetter <[email protected]> wrote: > Fellow Geeks, > > I am trying to set up port mirroring on a 3Com 4800G for my content filter. > Anyone out there have any experience with this? We had an older Cisco > switch, but I'm having trouble getting the same functionality out of this > 3Com. > > Thanks. > > Darin Hostetter > > Technology Coordinator > > Marshall School District > > _______________________________________________ > Tech-geeks mailing list > [email protected] > http://lists.illinicloud.org/cgi-bin/mailman/listinfo/tech-geeks > > -- "Don't ask yourself what the world needs. Ask yourself what makes you come alive and then go do that. Because what the world needs is people who have come alive." -Dr. Howard Thurman ****************************** Aaron Keith Hackney [email protected] Cell 210.325.2196 ****************************** _______________________________________________ Tech-geeks mailing list [email protected] http://lists.illinicloud.org/cgi-bin/mailman/listinfo/tech-geeks _______________________________________________ Tech-geeks mailing list [email protected] http://lists.illinicloud.org/cgi-bin/mailman/listinfo/tech-geeks
