Kyle, In WDS, if you go to the server and right click on it in the left side of the MMC, and go to properties you have to choose the Multicast tab. When getting ours setup, I didn't realize we had to set the "Multicast IP Address" section of that tab to "Use addresses from the following range". I think it is set to a default IPv4 From: 239.0.0.1 to 239.0.0.254. This works for us. Also, when setting up the multicast session, I have had to then "refresh" the server by clicking on the server, and then choosing the refresh button and then going to the Multicast Transmissions folder to see if the clients are sitting there waiting. This is assuming you choose "Scheduled-Cast" and then having to right click to start the transmission.
Dan Christ Assistant Technology Director Manteno CUSD #5 [email protected]<mailto:[email protected]> From: [email protected] [mailto:[email protected]] On Behalf Of Kyle Avooske Sent: Wednesday, August 18, 2010 11:12 AM To: 'Tech-Geeks Mailing List' Subject: [tech-geeks] WDS Multicasting We are trying to get WDS multicast working, but I we are failing hardcore. We setup up WDS and its multicast group on the server 2008 box. We then have our machines startup, go to pxe, and select the image that the multicast group is set to use. The computers then immediately start imagining, and not waiting for the condition of 10 computers to happen. Any thoughts? Kyle Avooske Asst. Network Technologist (618)254-7554 [email protected]<mailto:[email protected]> "Achieving Excellence with Passion, Pride, and Partnership"
| Subscription info at http://www.tech-geeks.org |
