On Tue, Sep 16, 2014 at 10:35:43AM -0300, Jared McNeill wrote: > On Tue, 16 Sep 2014, Manuel Bouyer wrote: > > >How do you say which driver you want in the kernel config file then ? > > In my case I have vendor / product IDs to help determine the board type.
that's what I don't have here. As it's 2 different and independant chips, you can have various mixes. > > Interesting problem though -- and I missed the part where you were using an > external i2c controller the first time through. I'm working on a similar > driver for the Cubieboard2 at the moment but the i2c controller is part of > the HDMI module, so I can simply use dev/i2c/ddc.c from there. I hope to use the existing ddc too, of course :) The framebuffer driver can export an I2C bus, which just redirects to the right controller. > > Do you plan on running the HDMI output and framebuffer at the same > resolution? For now that's my plan, yes. Unless wsdisplay makes it really too hard :) -- Manuel Bouyer <[email protected]> NetBSD: 26 ans d'experience feront toujours la difference --
