Hi, John. On 2014/12/26 21:12, John Klos wrote: > Hi, > > I have a machine which is currently running netbsd-6 with six wm* ethernet > interfaces. The first four are on a PCIe card which shows up like so: > > pci4: i/o space, memory space enabled, rd/line, wr/inv ok > wm0 at pci4 dev 0 function 0: Intel PRO/1000 PT Quad Port Server Adapter > (rev. 0x06) > wm0: interrupting at ioapic0 pin 17 > wm0: PCI-Express bus > wm0: 65536 word (16 address bits) SPI EEPROM > wm0: Ethernet address 00:15:17:73:0d:15 > igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0 > igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > wm1 at pci4 dev 0 function 1: Intel PRO/1000 PT Quad Port Server Adapter > (rev. 0x06) > wm1: interrupting at ioapic0 pin 16 > wm1: PCI-Express bus > wm1: 65536 word (16 address bits) SPI EEPROM > wm1: Ethernet address 00:15:17:73:0d:14 > igphy1 at wm1 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0 > igphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > ppb4 at pci3 dev 4 function 0: vendor 0x111d product 0x8018 (rev. 0x0e) > ppb4: PCI Express 1.0 <Downstream Port of PCI-E Switch> > pci5 at ppb4 bus 5 > pci5: i/o space, memory space enabled, rd/line, wr/inv ok > wm2 at pci5 dev 0 function 0: Intel PRO/1000 PT Quad Port Server Adapter > (rev. 0x06) > wm2: interrupting at ioapic0 pin 19 > wm2: PCI-Express bus > wm2: 65536 word (16 address bits) SPI EEPROM > wm2: Ethernet address 00:15:17:73:0d:17 > igphy2 at wm2 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0 > igphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > wm3 at pci5 dev 0 function 1: Intel PRO/1000 PT Quad Port Server Adapter > (rev. 0x06) > wm3: interrupting at ioapic0 pin 18 > wm3: PCI-Express bus > wm3: 65536 word (16 address bits) SPI EEPROM > wm3: Ethernet address 00:15:17:73:0d:16 > igphy3 at wm3 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0 > igphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > > > I was going to upgrade this system to netbsd-7 (built from the sources from > three hours ago), but when booting the kernel, this is what I get for wm0 > through wm3: > > pci4: i/o space, memory space enabled, rd/line, wr/inv ok > wm0 at pci4 dev 0 function 0: Intel PRO/1000 PT Quad Port Server Adapter > (rev. 0x06) > wm0: interrupting at ioapic0 pin 17 > wm0: PCI-Express bus > wm0: could not acquire SWSM SMBI > wm0: wm_nvm_acquire: failed to get semaphore > wm0: could not acquire SWSM SMBI > wm0: wm_nvm_acquire: failed to get semaphore > wm0: No EEPROM > wm0: unable to read Ethernet address > wm1 at pci4 dev 0 function 1: Intel PRO/1000 PT Quad Port Server Adapter > (rev. 0x06) > wm1: interrupting at ioapic0 pin 16 > wm1: PCI-Express bus > wm1: could not acquire SWSM SMBI > wm1: wm_nvm_acquire: failed to get semaphore > wm1: could not acquire SWSM SMBI > wm1: wm_nvm_acquire: failed to get semaphore > wm1: No EEPROM > wm1: unable to read Ethernet address > ppb4 at pci3 dev 4 function 0: vendor 0x111d product 0x8018 (rev. 0x0e) > ppb4: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ > 2.5GT/s > pci5 at ppb4 bus 5 > pci5: i/o space, memory space enabled, rd/line, wr/inv ok > wm2 at pci5 dev 0 function 0: Intel PRO/1000 PT Quad Port Server Adapter > (rev. 0x06) > wm2: interrupting at ioapic0 pin 19 > wm2: PCI-Express bus > wm2: 4096 words (16 address bits) SPI EEPROM > wm2: Ethernet address 00:15:17:73:0d:17 > igphy0 at wm2 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0 > igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > wm3 at pci5 dev 0 function 1: Intel PRO/1000 PT Quad Port Server Adapter > (rev. 0x06) > wm3: interrupting at ioapic0 pin 18 > wm3: PCI-Express bus > wm3: 4096 words (16 address bits) SPI EEPROM > wm3: Ethernet address 00:15:17:73:0d:16 > igphy1 at wm3 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0 > igphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > > > Does anyone know what's not right now with support for these Intel quad > gigabit cards? > > Thanks, > John Klos
Only first two devices are not good.... strange... > wm0 at pci4 dev 0 function 0: Intel PRO/1000 PT Quad Port Server Adapter > (rev. 0x06) It's 82571. My 82571 4 port card works on both netbsd-7 and -current: > pci0 at mainbus0 bus 0: configuration mode 1 > pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok > pchb0 at pci0 dev 0 function 0: vendor 8086 product 0c08 (rev. 0x06) > ppb0 at pci0 dev 1 function 0: vendor 8086 product 0c01 (rev. 0x06) > ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x8 @ > 8.0GT/s > pci1 at ppb0 bus 1 > pci1: i/o space, memory space enabled, rd/line, wr/inv ok > ppb1 at pci1 dev 0 function 0: vendor 111d product 8018 (rev. 0x0e) > ppb1: PCI Express capability version 1 <Upstream Port of PCI-E Switch> > pci2 at ppb1 bus 2 > pci2: i/o space, memory space enabled, rd/line, wr/inv ok > ppb2 at pci2 dev 2 function 0: vendor 111d product 8018 (rev. 0x0e) > ppb2: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ > 2.5GT/s > pci3 at ppb2 bus 3 > pci3: i/o space, memory space enabled, rd/line, wr/inv ok > wm0 at pci3 dev 0 function 0: Intel PRO/1000 PT Quad Port Server Adapter > (rev. 0x06) > wm0: interrupting at ioapic0 pin 19 > wm0: PCI-Express bus > wm0: 4096 words (16 address bits) SPI EEPROM > wm0: Ethernet address 00:18:fe:2e:d6:85 > igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0 > igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > wm1 at pci3 dev 0 function 1: Intel PRO/1000 PT Quad Port Server Adapter > (rev. 0x06) > wm1: interrupting at ioapic0 pin 18 > wm1: PCI-Express bus > wm1: 4096 words (16 address bits) SPI EEPROM > wm1: Ethernet address 00:18:fe:2e:d6:84 > igphy1 at wm1 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0 > igphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > ppb3 at pci2 dev 4 function 0: vendor 111d product 8018 (rev. 0x0e) > ppb3: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ > 2.5GT/s > pci4 at ppb3 bus 4 > pci4: i/o space, memory space enabled, rd/line, wr/inv ok > wm2 at pci4 dev 0 function 0: Intel PRO/1000 PT Quad Port Server Adapter > (rev. 0x06) > wm2: interrupting at ioapic0 pin 17 > wm2: PCI-Express bus > wm2: 4096 words (16 address bits) SPI EEPROM > wm2: Ethernet address 00:18:fe:2e:d6:87 > igphy2 at wm2 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0 > igphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > wm3 at pci4 dev 0 function 1: Intel PRO/1000 PT Quad Port Server Adapter > (rev. 0x06) > wm3: interrupting at ioapic0 pin 16 > wm3: PCI-Express bus > wm3: 4096 words (16 address bits) SPI EEPROM > wm3: Ethernet address 00:18:fe:2e:d6:86 > igphy3 at wm3 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0 > igphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto wm(4) has some debug code: > #ifdef WM_DEBUG > #define WM_DEBUG_LINK 0x01 > #define WM_DEBUG_TX 0x02 > #define WM_DEBUG_RX 0x04 > #define WM_DEBUG_GMII 0x08 > #define WM_DEBUG_MANAGE 0x10 > #define WM_DEBUG_NVM 0x20 > int wm_debug = WM_DEBUG_TX | WM_DEBUG_RX | WM_DEBUG_LINK | WM_DEBUG_GMII > | WM_DEBUG_MANAGE | WM_DEBUG_NVM; Could you define WM_DEBUG and set WM_DEBUG_NVM only in wm_debug, and then show me the full dmesg? Regards. -- ----------------------------------------------- SAITOH Masanobu (msai...@execsw.org msai...@netbsd.org)