Brian Buhrow <buh...@nfbcal.org> writes: > hello. Does anyone know what USB serial chip the Cisco USB serial > console is closest to > in our USB serial drivers list? the vendor code for the device I'm talking > about is: 0x05a6 > and the product code is: 0x0009. It doesn't look like we have a driver that > recognizes these > codes, but I'm thinking it should be easy enough to add them to an existing > driver. The > question is, which driver most closely supports these devices? My simple > Google search didn't > turn up much accept that the linux cdc_acm driver seems to support it. I > think this driver is > for serial class USB devices. Do we have a generic serial clas driver, like > we do for class > ethernet USB devices? > Any thoughts on this would be greatly appreciated. > -thanks > -Brian
This may not answer your question, but I have several 2960 Cisco switches and the USB port on them works just fine with umodem. In the 2960, they identify as: [ 609123.259177] umodem0 at uhub1 port 5 configuration 1 interface 0 [ 609123.259177] umodem0: Cisco (0x5a6) Cisco USB Console (0x09), rev 2.00/0.00, addr 6, iclass 2/2 [ 609123.259177] umodem0: data interface 1, has no CM over data, has no break [ 609123.259177] umodem0: status change notification available [ 609123.259177] ucom1 at umodem0 [ 609163.321067] ucom1: detached [ 609163.321067] umodem0: detached [ 609163.321067] umodem0: at uhub1 port 5 (addr 6) disconnected Seems like that may be what you have..... -- Brad Spencer - b...@anduin.eldar.org - KC8VKS - http://anduin.eldar.org